Linksys PAP2T HELP

Discussion in 'General' started by Rockyuk, Mar 11, 2011.

  1. Rockyuk

    Joined:
    Nov 8, 2010
    Messages:
    7
    Likes Received:
    0
    Hi Everyone,
    Has anyone managed to get this Linksys PAP2T to work with Elastix if so can you share your configuration please so i can try please.

    Thanks

    Rockyuk
     
  2. fmvillares

    Joined:
    Sep 8, 2007
    Messages:
    1,785
    Likes Received:
    0
    there are at least 30 different tutorials in google about how to configure freepbx and pap2 search there please
     
  3. Amphibian

    Joined:
    Sep 8, 2009
    Messages:
    1,128
    Likes Received:
    2
    Rokyuk,

    As fmvillares said, there is a ton of info on how to do this. Start here, pay extreme attention to the warnings, read the entire file first (and more times if you don't understand the first time reading)

    http://www.voip-info.org/wiki/view/Link ... ng+Methods

    If your real question is how or what the parameters are that you enter for making this work on your system then you will need to read "Elastix Without Tears" so that you understand how Elastix works and what info it needs to receive or make outgoing calls.

    Good Luck

    Amphibian
     
  4. franklin

    Joined:
    Oct 22, 2010
    Messages:
    254
    Likes Received:
    0
    If you have anything on Line 2 configured, make sure you have an extension configured on your PBX. I've experienced Line 1 not working if there is a conflict on line 2. Otherwise, setup is very straightforward if you read the manual. Good luck, and post back if you can't make it work.
     

Share This Page