Separate names with a comma.
Discussion in 'General' started by mfdukn, Oct 17, 2008.
How can i limit call duration for different extension independently?
Can i do it by GUI FreePBX?
May not be a complete solution, just for reference.
http://wiki.osslab.org.tw/%e5%af%a6%e9% ... 2%e9%96%93
I tested but not working
include => test-limit-call-duration ; Just for a trail
exten => 9900,1,playback(pls-wait-connect-call)
exten => 9900,2,set(TIMEOUT(absolute)=60)
exten => 9900,3,Dial(SIP/201)
exten => 9900,n,Hangup
I understand if make call from extension number 201 only call duration limit is 60Th?s ?s Ok or not
No, this case means that when you dial 9900 with extension non-201 then the call will be forwarded to ext.201 and if ext.201 is picked up the call will be hang up after 60 seconds.
I have done that with outgoing calls through a trunk, through a context. Not using FreePBX
I haven`t tried with internal calls
how can i apply options L(x:y:z) in statement Dial?
I mean do it in elastix, where all calls from extensions to external trunk are going via macroses, and i can not understand, where is that "Dial", that i can to edit:blush:
exten => _.,1,Set(TIMEOUT(absolute)=420)
;the below lines are default
include => from-internal-xfer
include => bad-number
i have this lines in my trixbox which limit the extensions call duration...
will this work on elastix also?