Junghanns dual bri and openvox b-200

Discussion in 'General' started by Usuarioforum, Mar 12, 2008.

  1. Usuarioforum

    Joined:
    Nov 15, 2007
    Messages:
    93
    Likes Received:
    0
    Hi:

    I have a problem with a dual bri isdn card. I have a junghanns dual bri and a openvox b-200 card. I have the problem with the two cards. I have changed de mISDN file to detect the card, but still not working. I can see the card in lspci and in mISDN scan. I understand that both cards are the same. MISDN loads in the systems but in the log I have this:

    Modular ISDN Stack core version (1_1_6) revision ($Revision: 1.40 $)
    mISDNd: kernel daemon started (current:f70b8000)
    mISDNd: test event done
    ISDN L1 driver version 1.20
    ISDN L2 driver version 1.32
    mISDN: DSS1 Rev. 1.47
    mISDN Capi 2.0 driver file version 1.21
    mISDN: HFC-multi driver Rev. 1.68
    0 devices registered
    mISDN_dsp: Audio DSP Rev. 1.29 (debug=0x0) EchoCancellor MG2 dtmfthreshold(100)
    mISDN_dsp: DSP clocks every 64 samples. This equals 8 jiffies.


    Is like the driver was not correct.

    Cheers
     
  2. OpenVox

    Joined:
    Oct 22, 2007
    Messages:
    39
    Likes Received:
    0
    Hi Usuarioforum,

    For the OpenVox B200P card, Would you please provide the dmesg and mISDN scan?

    Also,it will be good that you can have a look at the following link: http://www.openvox.com.cn/bbs/viewtopic.php?t=206

    Hope this can help!

    Regards,

    Belief Mo
    OpenVox
     
  3. adminad

    Joined:
    Apr 29, 2010
    Messages:
    150
    Likes Received:
    0
    What Elastix version are you using?
     
  4. Usuarioforum

    Joined:
    Nov 15, 2007
    Messages:
    93
    Likes Received:
    0
    I'm using 0.9.2.

    Openvox, I'm on my holidays and can't access to the server. I will send you the info.

    Cheers.
     

Share This Page