Issue with remote extentions

mcyclegar

Joined
Nov 13, 2008
Messages
9
Likes
0
Points
0
#1
Hello All,

I have installed the latest Elastix version and have the following issues.

1) Call from PSTN to an external extension on linksys 941 , phone does not ring and directly goes on VM.
2) Calls from PSTN to an external extension on a soft phone rings but there is no audio on both sides.
3) Calls to internal extentions works fine but does not go to VM if not pickedup.

Here is all the logs and information

sip show peers

Name/username Host Dyn Nat ACL Port Status
siptrunk/495609789 xxx.xx.213.5 N 5060 Unmonitored
106/106 192.168.1.7 D N 5060 OK (15 ms)
105/105 192.168.1.9 D N 5060 OK (20 ms)
104/104 174.95.88.154 D N 5060 OK (110 ms) (external Linksys)
103/103 192.168.1.10 D N 5060 OK (20 ms)
102/102 174.95.88.154 D N 45191 OK (204 ms) (external softphone)


sip show peer 104
* Name : 104
Secret : <Set>
MD5Secret : <Not set>
Context : from-internal
Subscr.Cont. : <Not set>
Language :
AMA flags : Unknown
Transfer mode: open
CallingPres : Presentation Allowed, Not Screened
Callgroup :
Pickupgroup :
Mailbox : 104@default
VM Extension : *97
LastMsgsSent : 3/0
Call limit : 50
Dynamic : Yes
Callerid : "device" <104>
MaxCallBR : 384 kbps
Expire : 3028
Insecure : no
Nat : Always
ACL : No
T38 pt UDPTL : No
CanReinvite : No
PromiscRedir : No
User=Phone : No
Video Support: No
Trust RPID : No
Send RPID : No
Subscriptions: Yes
Overlap dial : Yes
DTMFmode : rfc2833
LastMsg : 0
ToHost :
Addr->IP : xxx.xx.xx.154 Port 5060
Defaddr->IP : 0.0.0.0 Port 5060
Def. Username: 104
SIP Options : (none)
Codecs : 0xc (ulaw|alaw)
Codec Order : (ulaw:20,alaw:20)
Auto-Framing: No
Status : OK (118 ms)
Useragent : Sipura/SPA941-4.1.8
Reg. Contact : sip:104@192.168.2.22:5060

sip_nat.conf
nat=yes
externhost=sip.zyx.com
localnet=192.168.1.0/255.255.255.0
externrefresh=10

rtp.conf
;
; RTP Configuration
;
[general]
;
; RTP start and RTP end configure start and end addresses
;
rtpstart=10000
rtpend=50000


Attached is the log with sip debug on to all the problematic extensions logs are attached as different post on the same thread.

Please help me to resolve this.

Thanks
Mohammed
 

mcyclegar

Joined
Nov 13, 2008
Messages
9
Likes
0
Points
0

mcyclegar

Joined
Nov 13, 2008
Messages
9
Likes
0
Points
0

mcyclegar

Joined
Nov 13, 2008
Messages
9
Likes
0
Points
0
#4

Members online

No members online now.

Latest posts

Forum statistics

Threads
30,898
Messages
130,879
Members
17,560
Latest member
manuelc
Top