Is this a bug?

Discussion in 'General' started by satchid, Feb 26, 2010.

  1. satchid

    Joined:
    Sep 13, 2007
    Messages:
    57
    Likes Received:
    0
    Hi,
    I just loocked in unembedded free pbx of elastix and found the following:
    elastix info
    active channels
    And found the folowing:

    Channel Location State Application(Data)
    SIP/888-00000b26 88881234@from-intern Up MeetMe(8888)
    SIP/8423-00000b24 8888@from-internal:1 Up MeetMe(8888|mls)
    SIP/8423-000009b4 8888@from-internal:1 Up MeetMe(8888|mls)
    SIP/888-0000000a 88881234@from-intern Up MeetMe(8888)
    DAHDI/pseudo-1455512 s@default:1 Rsrvd (None)
    5 active channels
    4 active calls

    As you can see there are these 2 lines in it:

    SIP/8423-00000b24 8888@from-internal:1 Up MeetMe(8888|mls)
    SIP/8423-000009b4 8888@from-internal:1 Up MeetMe(8888|mls)


    I do think that they chould not be there becouse the softphone on my laptop (number 8423) is not on.
    I think this happened because i started to listen to the meetmee (8888) and without stopping the conection, I close my laptop. On an other locationI I opened my laptop again, and it started also automaticaly the conference. Now, I stopped the conference but on the list one line stayed on. I tested this happening again and now I have 2 lines remaining.
    If I propperly open and close the meetme, then the line apears, and disapears after closing.

    I can still call from this laptop.
    I do not know much of elastix, therefore is there someboddy that can help me to remove these lines? Is there a way to remove the couse of it?

    This is how my meetme is setup in extensions.custo.conf

    [ext-meetme-custom]

    ;;Conference rooms 8888

    exten => 8888,1,MeetMe(8888|mls)
    )
    exten => 8888,2,Hangup()
    exten => 88881234,1,Meetme(8888)
    exten => 88881234,2,Hangup()

    ;;end ext-meetme-custom

    I had to make a custom configuration because the conference room has to run infintly or until stopped, and other then the administrator, everyboddy can listen only.



    Thank you,
    Willy
     
  2. dicko

    Joined:
    Oct 24, 2008
    Messages:
    4,099
    Likes Received:
    0
    try

    rasterisk -rx "soft hangup SIP/8423-00000b24" (for each channel)


    reconnect the meetme from 8423 and then log out gracefully.
     
  3. satchid

    Joined:
    Sep 13, 2007
    Messages:
    57
    Likes Received:
    0
    thank you, it worked.
    <greetings

    Willy
     

Share This Page