Installing HUD for ELastix and for your life ;)

Discussion in 'General' started by haamed, Oct 18, 2008.

  1. haamed

    Joined:
    Jul 23, 2007
    Messages:
    251
    Likes Received:
    0
    #####HUD#####

    A) run commands

    yum install libX11 < X is upercase >
    cd /root

    1.
    wget http://yum.trixbox.org/centos/5/RPMS/ir ... 1.i386.rpm
    rpm -Uvh ircd-hybrid-7.2.1-1.i386.rpm
    service ircd start

    2.
    wget http://yum.trixbox.org/centos/5/RPMS/pe ... f.i386.rpm
    rpm -Uvh perl-Curses-1.15-1.rf.i386.rpm

    3.
    wget http://yum.trixbox.org/centos/5/RPMS/pe ... f.i386.rpm
    rpm -Uvh perl-Term-ReadKey-2.30-2.rf.i386.rpm

    4.
    wget http://yum.trixbox.org/centos/5/RPMS/pe ... 4.i386.rpm
    rpm -Uvh perl-Tk-804.027-4.i386.rpm

    5.
    wget http://yum.trixbox.org/centos/5/RPMS/pe ... f.i386.rpm
    rpm -Uvh perl-Net-DNS-0.61-1.el4.rf.i386.rpm --force

    6.
    wget http://yum.trixbox.org/centos/5/RPMS/pe ... noarch.rpm
    rpm -Uvh perl-POE-0.34-1.el4.rf.noarch.rpm

    7.
    wget http://yum.trixbox.org/centos/5/RPMS/pe ... noarch.rpm
    rpm -Uvh perl-POE-Component-Client-DNS-0.9803-1.2.el4.rf.noarch.rpm

    8.
    wget http://yum.trixbox.org/centos/5/RPMS/pe ... 1.i386.rpm
    rpm -Uvh perl-XML-Parser-2.34-6.1.2.2.1.i386.rpm

    9.
    wget http://yum.trixbox.org/centos/5/RPMS/pe ... noarch.rpm
    rpm -Uvh perl-XML-Simple-2.14-4.fc6.noarch.rpm

    10.
    wget http://mirror.centos.org/centos/5/os/i3 ... noarch.rpm
    rpm -Uvh perl-XML-NamespaceSupport-1.09-1.2.1.noarch.rpm

    11.
    wget http://mirror.centos.org/centos/5/os/i3 ... noarch.rpm
    rpm -Uvh perl-XML-SAX-0.14-5.noarch.rpm

    mkdir /etc/asterisk/hud

    wget http://yum.trixbox.org/centos/5/RPMS/hu ... 1.i386.rpm
    rpm -Uvh hudlite-server-1.4.32-1.i386.rpm --force

    B) Get hudadmin-1.2.0.23-4 from here & copy to root dir:
    http://www.2shared.com/file/3787084/651 ... oarch.html

    rpm -Uvh tbm-hudadmin-1.2.0.23-4.noarch.rpm --force

    C) check the manager_custom.conf to make sure you see these lines:

    [remote_mgr]
    secret=0chanc3yo
    deny=0.0.0.0/0.0.0.0
    permit=127.0.0.1/255.255.255.0
    read=system,call,log,verbose,command,agent,user
    write=system,call,log,verbose,command,agent,user

    4- restart your machine: "shutdown -r now"


    5-Go to this URL & set HUD clients passwords:

    https://YourElastixIP/maint/modules/12_ ... dadmin.php


    ##################################
    Haamed Kouhfallah
    ??
     
  2. nav1

    Joined:
    Dec 2, 2009
    Messages:
    5
    Likes Received:
    0
    Hi Haamed,
    I am looking at your HUD installation but wget yum.trixbox.org/centos/5/RPMS/ircd-hybrid-7.2.1-1.i386.rpm is no longer available . Do you have an updated documentation.
    Thanks
    Naveed
     
  3. haamed

    Joined:
    Jul 23, 2007
    Messages:
    251
    Likes Received:
    0
    i don't use HUD B)
    if i have a free time in this weak i will test it and update post again...
     
  4. mbit

    Joined:
    Jul 4, 2007
    Messages:
    466
    Likes Received:
    0
    Hi

    I have put everything into a script which will install HUD for you. You can grab it at http://www.mbit.com.au/hud/hud.tar.gz

    Put it into a directory /var/hud and then execute the script file in there. Then go into FreePBX and activate the HUD module. When you are installing the HUD client the password is password.
     
  5. mbit

    Joined:
    Jul 4, 2007
    Messages:
    466
    Likes Received:
    0
    I am not going to keep this script updated for HUD because in it will not work once asterisk goes to 1.6. Hopefully Fonality will release HUD3 for Trixbox CE and we can port it over.
     

Share This Page