Install chan_ss7, asterisk, zaptel, openvox PRI

Discussion in 'General' started by james.zhu, Aug 31, 2009.

  1. james.zhu

    Joined:
    Feb 13, 2008
    Messages:
    99
    Likes Received:
    0
    hello:
    if you want to install asterisk, chan_ss7 and zaptel, please follow these steps:
    1) download asterisk-1.4.20, zaptel-1.4.10 and chan_ss7_1.1
    2) unzip asterisk-1.4.20.tar.gz to /usr/src, under asterisk dir, please run: ./configure, make and make install, make samples.
    3) unzip zaptel-1.4.10.tar.gz to /usr/src/, under zaptel dir, please run: ./confiugre, make and make install
    4) unzip the chan_ss7_1.1 to /usr/src, under chan_ss7_1.1, please do this:
    4.1) modify the Makefile, do like this:
    =======================
    # non-standard places.
    INCLUDE+=-I /usr/src/zaptel-1.4.10/kernel ; point to the zaptel source
    #INCLUDE+=-I../source/telephony/dahdi/include
    INCLUDE+=-I /usr/src/asterisk-1.4.20 ; point to asterisk source
    =======================
    4.2) save and quit
    4.3) run make , make install
    4.4) copy the ss7.conf file to /etc/asterisk
    4.5) copy the chan_ss7.so to /usr/lib/asterisk/modules
    5) edit the zaptel.conf like this:
    ===========================
    # Autogenerated by ./genzaptelconf -- do not hand edit
    # Zaptel Configuration File
    #
    # This file is parsed by the Zaptel Configurator, ztcfg
    #

    # It must be in the module loading order

    # Span 1: TE4/0/1 "T4XXP (PCI) Card 0 Span 1" (MASTER)
    span=1,1,0,ccs,hdb3,crc4
    # termtype: te
    bchan=1-15,17-31
    dchan=16

    # Span 2: TE4/0/2 "T4XXP (PCI) Card 0 Span 2"
    span=2,2,0,ccs,hdb3,crc4
    # termtype: te
    bchan=32-46,48-62
    dchan=47

    # Span 3: TE4/0/3 "T4XXP (PCI) Card 0 Span 3"
    span=3,3,0,ccs,hdb3,crc4
    # termtype: te
    bchan=63-77,79-93
    dchan=78

    # Span 4: TE4/0/4 "T4XXP (PCI) Card 0 Span 4"
    span=4,4,0,ccs,hdb3,crc4
    # termtype: te
    bchan=94-108,110-124
    dchan=109

    # Global data

    loadzone = us
    defaultzone = us
    ===========================
    6) edit ss7.conf like this:
    ===========================
    [linkset-ls1]
    enabled => yes
    enable_st => yes
    use_connect => no
    hunting_policy => even_mru
    context => ss7_call
    language => en
    subservice => auto
    variant => CHINA ;
     
  2. tareq

    Joined:
    Apr 1, 2010
    Messages:
    17
    Likes Received:
    0
    Hello If i want to compile chan_ss7 what i have to do?? after elastix installation
     

Share This Page