Incoming FAX over SIP (ELASTIX 2.0)

Discussion in 'General' started by vanillatwilight, Jan 13, 2011.

  1. vanillatwilight

    Joined:
    Jan 10, 2011
    Messages:
    4
    Likes Received:
    0
    Hi,

    Here's my setup:

    - Elastix 2.0
    - Fax Printer - configured as SIP extension via ATA
    - Dedicated DID for receiving FAX

    I have tested outgoing fax using the fax printer, and it's working fine.
    Now, I'm having problem with incoming fax.
    When I call the DID for fax, i hear the fax tone. And as I observe in the CLI it is actually receiving the fax.
    I see the ReceiveFax function temporarily saving the fax in /var/spool/asterisk/fax. But after this it goes Auto fallthrough, channel 'DAHDI/X-X' status is UNKNOWN and then it fails to print the fax in the fax printer. However, I can receive the fax in the designated email address.

    Any idea on how to fix this?

    Thank you in advance!
     
  2. sababa

    Joined:
    Jul 28, 2010
    Messages:
    63
    Likes Received:
    0
    Why don't you just have the inbound route go directly to the ATA connected to the fax printer?
    Skip the email config and just use freepbx for it not hylafax.

    I have a few installs where this works. If you need more help or need more clarification just ask.
     

Share This Page