Incoming calls to PAP2

Discussion in 'General' started by YerCraw, Oct 26, 2010.

  1. YerCraw

    Joined:
    Oct 24, 2010
    Messages:
    6
    Likes Received:
    0
    Hello again...

    I'm hoping someone can help me with this little problem...

    The scenario is...

    PSTN = TDM400P POTS (DAHDI compatibility Mode) - i/c and o/g works
    SIP = iiNet - all good :)
    EXTN 20 = linksys PAP2
    EXTN 30 = eyeBeam softphone

    If I call extn 20 from extn 30 - all good
    If I call extn 20 from SIP - all good
    If I call extn 20 from PSTN - call goes directly to v/m extn 20 busy message
    If I call extn 30 from PSTN - all good

    can someone please help :blink:

    Thank you
     
  2. YerCraw

    Joined:
    Oct 24, 2010
    Messages:
    6
    Likes Received:
    0
    found a fix....

    checked the log files and found...

    -- Got SIP response 486 "Busy Here" back from 192.168.1.51
    -- SIP/20-00000002 is busy

    so i had a look at the Linksys box and changed the settings according to

    http://www.freepbx.org/support/document ... -conflicts

    All good now :)
     

Share This Page