Incoming calls to FXS port

Discussion in 'Gateways' started by lexmooze, Nov 11, 2010.

  1. lexmooze

    Joined:
    Nov 11, 2010
    Messages:
    5
    Likes Received:
    0
    Hi!

    I have a TDM410P with 3 fxo + 1 fxs, and i can´t answer the incoming calls with a analog phone plugged to the FXS port. It is always redirected to the voicemail.

    There is a inbound route to catch all incoming calls.
    And this is the message i get from the CLI screen:

    -- <SIP/vono-00000004>AGI Script dialparties.agi completed, returning 0
    -- Executing [s@macro-dial:7] Dial("SIP/vono-00000004", "DAHDI/4,,tr") in new stack
    == Everyone is busy/congested at this time (1:0/0/1)
    -- Executing [s@macro-dial:8] Set("SIP/vono-00000004", "DIALSTATUS=CHANUNAVAIL") in new stack
    -- Executing [s@macro-dial:9] GosubIf("SIP/vono-00000004", "0?CHANUNAVAIL,1") in new stack


    Anyone can help me??
    Thanks
     
  2. lexmooze

    Joined:
    Nov 11, 2010
    Messages:
    5
    Likes Received:
    0
    Solved.
    Cant make the callerID works now.
     
  3. lexmooze

    Joined:
    Nov 11, 2010
    Messages:
    5
    Likes Received:
    0
    I believe there is something to do with the zapata.conf

    ;# Flash Operator Panel will parse this file for zap trunk buttons
    ;# AMPLABEL will be used for the display labels on the buttons

    ;# %c Zap Channel number
    ;# %n Line number
    ;# %N Line number, but restart counter
    ;# Example:
    ;# ;AMPLABEL:Channel %c - Button %n

    ;# For Zap/* buttons use the following
    ;# (where x=number of buttons to dislpay)
    ;# ;AMPWILDCARDLABEL(x):MyLabel


    [channels]
    language=pt_BR
    context=default
    usecallerid=yes
    hidecallerid=no
    callwaiting => yes
    usecallingpres=> yes
    callwaitingcallerid=yes
    threewaycalling=yes
    transfer=yes
    cancallforward=yes
    callreturn=yes
    echocancel=yes
    echocancelwhenbridged=yes
    ;echotraining=yes
    ;echotraining=800
    immediate=no
    callerid=asreceived
    loglevel=255


    ; include zap extensions defined in AMP
    #include zapata_additional.conf

    ; XTDM20B Port #1,2 plugged into PSTN
    ;AMPLABEL:Channel %c - Button %n

    group=0
    channel=1-3
    sendcalleridafter=2
    ukcallerid=yes
    context=from-zaptel
    signalling=fxs_ks
    usecallerid=yes
     

Share This Page