incoming calls to elastix from behind nat

Discussion in 'General' started by mie, Jan 24, 2010.

  1. mie

    mie

    Joined:
    Oct 6, 2008
    Messages:
    13
    Likes Received:
    0
    Hi All! I have 1.6 version.My config- Elastix with local client behind nat, client behind another nat. Outgoing calls from local client thru elastix to another client behind another nat go perfectly but on the contrary it works during 20 sec and elastix hangups. I googled all the internet and saw many explanations,advices etc why it is. Nothing helps! I downloaded 1.3-2 version,installed,made portforwarding and it works!!! I didnt even touch sip_custom.conf,sip_nat.conf etc. I mean it works wrong! I tried 2.0alfa3, 2.0beta1-all the same. Does Nobody see it? May be All use outgoing calls only...but i need inbound too.Where is the reason? Thx in advice.
    ps-In 2.0beta1 i could not even make local calls to each other.
     
  2. mbit

    Joined:
    Jul 4, 2007
    Messages:
    466
    Likes Received:
    0
    You will need to open up a file called sip_nat.conf and set the following commands

    externip=111.111.111.111
    localnet=192.168.0.1/255.255.255.0

    Put in your external ip address and your local network settings and then restart your machine. Give it a try after this.
     

Share This Page