Inbound routing problem (Gizmo) DID is ignored

Discussion in 'General' started by magicyes, Aug 17, 2009.

  1. magicyes

    Joined:
    Jun 9, 2009
    Messages:
    16
    Likes Received:
    0
    I am experiencing a weired problem with gizmo5.com

    I setup an account, and took a while to figure out how to get the inbound routing to work.
    gizmo assigns a 1747 number which the DID contacted when receiving the call
    but the strange thing is that if I set the inbound routing with the 747 DID nothing happens (in the debug it shows as no did march)
    I found that when a call is received
    the pbx tries to contact a single character contact: "s@123.123.123.123" (123.123.123.123 is in place of my box ip)

    here is what I get from the log

    Code:
    SIP/2.0 100 Trying 
    Via: SIP/2.0/UDP 198.65.166.131;branch=z9hG4bK6142.9e62cec.0;received=198.65.166.131 Via: SIP/2.0/UDP 198.65.166.131;branch=z9hG4bK6142.8e62cec.0 
    Via: SIP/2.0/UDP 198.65.166.147:5060;branch=z9hG4bK164887a9;rport=5060 
    Record-Route: <sip:198.65.166.131;lr;ftag=as22f6e55f> 
    Record-Route: <sip:198.65.166.131;lr;ftag=as22f6e55f> 
    From: "anonymous" <sip:anonymous@198.65.166.147>;tag=as22f6e55f 
    To: <sip:747XXXXXX@proxy01.sipphone.com> 
    Call-ID: 58550b1c51b9c3d377812de50d070fa7@198.65.166.147 
    CSeq: 102 INVITE 
    User-Agent: Asterisk PBX 
    Allow: INVITE, ACK, CANCEL, OPTIONS, BYE, REFER, SUBSCRIBE, NOTIFY 
    Supported: replaces 
    Contact: <sip:s@123.123.123.123>
    
    not a big deal so far, since I just setup an inbound route with "s" as the did and it works

    the problem is that I need another Gizmo account and it behaves exactly in the same strange way, so basically I can't change the routing... they both want to contact: "s@123.123.123.123"

    Am I missing something here?
    I took a good look on the internet and everybody says that to setup their Gizmo inbound routing they used the 747DID (including some tutorial found on http://nerdvittles.com)

    hope somebody can help with this as it's driving me a little nuts
    I am not sure if there is something about elastix that I don't know or it's just gizmo that has gone nuts!
     
  2. magicyes

    Joined:
    Jun 9, 2009
    Messages:
    16
    Likes Received:
    0
    bump...
    anyone has a clue about this?

    thnaks
     

Share This Page