inbound and outbound routes questions

Discussion in 'General' started by leiw3248, Dec 8, 2009.

  1. leiw3248

    Joined:
    Apr 21, 2008
    Messages:
    476
    Likes Received:
    0
  2. haamed

    Joined:
    Jul 23, 2007
    Messages:
    251
    Likes Received:
    0
    if you want to dial out from specific FXO (like your example), you should define group for each FXO line in chan_dahdi.conf and define Trunck for each group (like: g0 for fxo1, g1 for fxo2, g2 for fxo3, g3 for fxo 4).
    if you look chand_dahdi.conf by default all the FXO lines are in the same group g0 , you can chaned tham to g0 to g3 , and you should 4 trunk from g0 to g3.
    now you can define outboound route for each trunk.
     
  3. leiw3248

    Joined:
    Apr 21, 2008
    Messages:
    476
    Likes Received:
    0
    In chand_dahi.conf, I only can see the following contents:

    [trunkgroups]

    [channels]
    context=from-pstn
    signalling=fxs_ks
    rxwink=300 ; Atlas seems to use long (250ms) winks
    usecallerid=yes
    hidecallerid=no
    callwaiting=yes
    usecallingpres=yes
    callwaitingcallerid=yes
    threewaycalling=yes
    transfer=yes
    canpark=yes
    cancallforward=yes
    callreturn=yes
    echocancel=yes
    echocancelwhenbridged=no
    faxdetect=incoming
    echotraining=800
    rxgain=0.0
    txgain=0.0
    callgroup=1
    pickupgroup=1

    ;Uncomment these lines if you have problems with the disconection of your analog lines
    busydetect=yes
    busycount=3


    immediate=no

    #include dahdi-channels.conf
    #include chan_dahdi_additional.conf
     
  4. haamed

    Joined:
    Jul 23, 2007
    Messages:
    251
    Likes Received:
    0
    You can find it in dahdi-channels.conf file. B)
     

Share This Page