I can't install TE420P?

Discussion in 'Gateways' started by pbx.voip, May 20, 2009.

  1. pbx.voip

    Joined:
    Oct 21, 2008
    Messages:
    90
    Likes Received:
    0
    Guys,

    I have a HP Proliant ML110G5 and a TE110P 4 months ago and it's ok, with Elastix version 1.5.2-2 and CentOS release 5.2 (Final).

    Now I need install a new card TE420P (PCI Express x1) with echo cancellation, but the installation is impossible, when I install the card my server is lock after up all services. The error is:

    nmi received for unknown reason 34 on cpu0.
    do you have a strange power saving mode enabled?
    dazed and confused, but trying to continue


    I modified the kernel line in grub.conf with all possible combinations and nothing.

    1) kernel /vmlinuz-2.6.18-53.1.19.el5 ro root=/dev/VolGroup00/LogVol00 rhgb quiet nmi_watchdog=0
    2) kernel /vmlinuz-2.6.18-53.1.19.el5 ro root=/dev/VolGroup00/LogVol00 rhgb nmi_watchdog=0
    3) kernel /vmlinuz-2.6.18-53.1.19.el5 ro root=/dev/VolGroup00/LogVol00 nmi_watchdog=0
    4) kernel /vmlinuz-2.6.18-53.1.19.el5 ro root=/dev/VolGroup00/LogVol00 rhgb quiet nohpet
    5) kernel /vmlinuz-2.6.18-53.1.19.el5 ro root=/dev/VolGroup00/LogVol00 rhgb nohpet
    6) kernel /vmlinuz-2.6.18-53.1.19.el5 ro root=/dev/VolGroup00/LogVol00 nohpet
    7) kernel /vmlinuz-2.6.18-53.1.19.el5 ro root=/dev/VolGroup00/LogVol00 nmi_watchdog=0 nohpet

    and other and nothing.

    My grub.conf file is:

    # grub.conf generated by anaconda
    #
    # Note that you do not have to rerun grub after making changes to this file
    # NOTICE: You have a /boot partition. This means that
    # all kernel and initrd paths are relative to /boot/, eg.
    # root (hd0,0)
    # kernel /vmlinuz-version ro root=/dev/VolGroup00/LogVol00
    # initrd /initrd-version.img
    #boot=/dev/mapper/ddf1_MAIN_HDD_RAID1
    default=2

    timeout=5
    splashimage=(hd0,0)/grub/splash.xpm.gz
    #hiddenmenu

    title CentOS (2.6.18-92.1.22.el5)
    root (hd0,0)
    kernel /vmlinuz-2.6.18-92.1.22.el5 ro root=/dev/VolGroup00/LogVol00
    initrd /initrd-2.6.18-92.1.22.el5.img
    title Elastix (2.6.18-53.1.19.el5xen)
    root (hd0,0)
    kernel /xen.gz-2.6.18-53.1.19.el5
    module /vmlinuz-2.6.18-53.1.19.el5xen ro root=/dev/VolGroup00/LogVol00
    module /initrd-2.6.18-53.1.19.el5xen.img
    title Elastix-base (2.6.18-53.1.19.el5)
    root (hd0,0)
    kernel /vmlinuz-2.6.18-53.1.19.el5 ro root=/dev/VolGroup00/LogVol00
    initrd /initrd-2.6.18-53.1.19.el5.img

    My cat/proc/interrumps is:

    CPU0 CPU1
    0: 1854800 1992631 IO-APIC-edge timer
    1: 3 2 IO-APIC-edge i8042
    8: 0 1 IO-APIC-edge rtc
    9: 1 0 IO-APIC-level acpi
    14: 308 312 IO-APIC-edge ide0
    15: 20934 21009 IO-APIC-edge ide1
    50: 71052 0 PCI-MSI eth0
    169: 23 28 IO-APIC-level uhci_hcd:usb1, uhci_hcd:usb4, ehci_hcd:usb8
    177: 0 0 IO-APIC-level uhci_hcd:usb2, uhci_hcd:usb5
    225: 20778 20803 IO-APIC-level uhci_hcd:usb3, uhci_hcd:usb6, ehci_hcd:usb7, libata
    233: 1976482 1838232 IO-APIC-level wcte11xp
    NMI: 0 0
    LOC: 3782126 3781943
    ERR: 0
    MIS: 0

    Do you have a idea?

    Thanks,
     

Share This Page