Howto show clid as source in asterisk

Discussion in 'General' started by johnme, Jul 15, 2009.

  1. johnme

    Joined:
    Nov 28, 2008
    Messages:
    148
    Likes Received:
    0
    Hello

    I have a sip trunk for a gsm portech mv370.
    There is no register string.

    The settings for the incoming calls are:

    USER Context: gsmgateway

    USER Details:
    username=gsmgateway
    type=friend
    secret=????
    qualify=yes
    nat=no
    insecure=very
    host=dynamic
    dtmfmode=info
    context=from-internal
    canreinvite=no
    disallow=all
    allow=ulaw&alaw


    When somebody calls me in reports i can see as source = gsmgateway and clid = (the tel number of the person who calls me)

    The problem is that if the call goes to the voicemail then i can hear the message but i dont know the number of the person who left the message. Because the voicemail tell you the source number.
    So is there a way when somebody calls me from that trunk not to give me the real source number but the clid as source?

    Thanks
    John
     
  2. johnme

    Joined:
    Nov 28, 2008
    Messages:
    148
    Likes Received:
    0
    Hi

    Sometimes you have the answer but you dont know it.

    The portech has an option in mobile settings that say: sip from
    I put the option "tel/tel (not reg)" and thats it.

    Thanks
    John
     

Share This Page