How to specify channel with mISDN and CAPI driver

Discussion in 'General' started by helco, Mar 16, 2009.

  1. helco

    Joined:
    Mar 16, 2009
    Messages:
    1
    Likes Received:
    0
    I have a HFC ISDN card and an AVM C4 card in TE mode.

    If I use "bristuff" driver for HFC card I can specify which ISDN channel to use for outgoing calls.

    Is it possible to specify which channel to be used with mISDN driver for HFC card and CAPI driver for AVM C4 card?

    If it is possible how to be done?



    In my case I use an ISDN GSM gateways with 2 SIM cards. It's impossible to be set in gateway which SIM card to be used according to MSN number but you can set which card to work with 1st ot 2nd ISDN channel. That is the reason I am looking for this settings.
     
  2. ramoncio

    Joined:
    May 12, 2010
    Messages:
    1,663
    Likes Received:
    0
    If you use bristuff your isdn ports will be mapped to zap channels.
    Using lszaptel you should see your zap channels, and then use the one you want, e.g. ZAP/2

    EDIT: Oops, sorry I didn't read well your post. I have never used capi, can't help you with that.
     

Share This Page