How to one FXO detect fax and voice ?

Discussion in 'General' started by leiw3248, Sep 24, 2009.

  1. leiw3248

    Joined:
    Apr 21, 2008
    Messages:
    476
    Likes Received:
    0
    Hello

    I'm using Elastix 1.5.2 with TDM400P.

    The Elastix without tear guideline page 121 have to setup zapata.conf, but I use locate command to search Elastix only has the following zapata.conf location:

    [root@elastix asterisk]# locate zapata.conf
    /etc/asterisk/zapata.conf.template
    /etc/wanpipe/wancfg_zaptel/templates/zapata.conf
    /etc/wanpipe/wancfg_zaptel/templates/.svn/text-base/zapata.conf.svn-base

    Which zapata.conf I need to edit ?

    Thank !
     
  2. DaveD

    Joined:
    Nov 12, 2007
    Messages:
    597
    Likes Received:
    0
    Elastix 1.5.2 no longer uses zaptel ,it is replaced by Dahdi

    You now need to edit /etc/asterisk " chan_dahdi.conf " and " dahdi-channels.conf "
    They are similar settings to zaptel so can still use the settings from Elastix without Tears

    I would also install Nvfax as it works on SIP and zaptel, the files are on the forum with install instructions just search for NVfax
     
  3. leiw3248

    Joined:
    Apr 21, 2008
    Messages:
    476
    Likes Received:
    0
    It work !

    Thank !
     

Share This Page