How To Minimize Responding Time Of Inbound Call ?

Discussion in 'General' started by ismed, Dec 13, 2009.

  1. ismed

    Joined:
    Oct 1, 2009
    Messages:
    120
    Likes Received:
    0
    Dear Experts,
    I notice that my elastix 1.6/freepbx 2.6 will respond a pstn inbound call to fxo analog line after 3 (three) times of ring back tone. Is that possible to get it shorter or immediately respond the incoming call and where to change the parameter?

    Awaiting your respond soon and thank you.

    Best regards,
    Ismed
     
  2. ismed

    Joined:
    Oct 1, 2009
    Messages:
    120
    Likes Received:
    0
    Re:How To Minimize Responding Time Of Inbound Call

    Thanks patrick,
    The answer there still unclear and only mentioning about immediate=yes, I tried but no different and mentioned there that we will not able to receive caller id. Similar to the incoming call I also got the same problem when I call out from zap extension, the trunk wait and delay for about 3 or 4 second before it dials the pstn.

    Belows is my config by no different :

    [channels]
    context=from-pstn
    signalling=fxs_ks
    rxwink=300 ; Atlas seems to use long (250ms) winks
    usecallerid=yes
    hidecallerid=no
    callwaiting=yes
    usecallingpres=yes
    callwaitingcallerid=yes
    ;threewaycalling=yes
    transfer=yes
    canpark=yes
    cancallforward=yes
    callreturn=yes
    echocancel=yes
    echocancelwhenbridged=no
    ;faxdetect=incoming
    ;echotraining=800
    rxgain=2.0
    txgain=4.0
    callgroup=1
    pickupgroup=1

    ;Uncomment these lines if you have problems with the disconection of your analog lines
    ;busydetect=yes
    ;busycount=3


    ;immediate=no
    immediate=yes

    #include dahdi-channels.conf
    #include chan_dahdi_additional.conf


    Awaiting your respond and thanks again.

    Best regards,
    Ismed
     

Share This Page