How to change outbound routes trunk sequence

Discussion in 'General' started by leiw3248, Dec 7, 2009.

  1. leiw3248

    Joined:
    Apr 21, 2008
    Messages:
    476
    Likes Received:
    0
    Hello

    I want to separate two outbound routes with 4 FXO.

    g0 = 1 and 2 FXO

    g1 = 3 and 4 FXO

    I captured a trunk sequence for reference.


    Thank ! [​IMG]
     
  2. hinzinho

    Joined:
    Sep 18, 2009
    Messages:
    461
    Likes Received:
    0
    You got two ways:

    1) Create a trunk for each FXO and then add them into the Trunk Sequence
    2) Go to dahdi-channels.conf and separate the FXO into two groups.

    I not a pro in Asterisk, so there might be better ways of doing it.
     
  3. leiw3248

    Joined:
    Apr 21, 2008
    Messages:
    476
    Likes Received:
    0
    Hello

    I can change them in dahdi-channels.conf (required reboot).

    I have two number: 12345678 and 98765432, I don't know how to define those two number to g0 and g1 on inbound routes.

    Thank !
     
  4. jmbaruk

    Joined:
    Sep 8, 2009
    Messages:
    30
    Likes Received:
    0
    If you have your the outbound channels working the only thing you need to do is setup the ZAP DIDs using the unembended free pbx and set up the DIDs using the specific channels and then from your chna-dahdi.conf and dahdi_channels.conf set the context to from-zaptel and your DIDs will work with your inbound routes perfectly all you need to do is set the termination point which is provided by the free pbx when you are setting up the inbonb routes
     

Share This Page