How to bypass callerid ?

Discussion in 'General' started by nighthare, Dec 5, 2010.

  1. nighthare

    Joined:
    Dec 5, 2010
    Messages:
    4
    Likes Received:
    0
    Hi there!

    I've SPA3102 which is connected as extension and transfers callerid but Elastix/FreePBX generates extension this way -

    Code:
    [XXX]
    deny=0.0.0.0/0.0.0.0
    secret=XXX
    dtmfmode=rfc2833
    canreinvite=no
    context=from-internal
    host=dynamic
    type=friend
    nat=yes
    port=5060
    qualify=yes
    callgroup=
    pickupgroup=
    dial=SIP/XXX
    accountcode=
    mailbox=XXX@device
    permit=0.0.0.0/0.0.0.0
    callerid=device <XXX>
    call-limit=50
    faxdetect=no
    where callerid is determined. If I delete this string everything works fine but this string is generated even then Outbound CID is empty What i should do to make FreePBX not generating callerid or how to bypass callerid which is transferred from the extension ?

    I tried to add In /etc/asterisk/sip_custom_post.conf following

    Code:
    [xxx](-)
    callerid=device <XXX>
    but i doesn't help too. How i can disable generating callerid string?
     

Share This Page