How Add Trunk via D410P

Discussion in 'Gateways' started by bwg, Oct 13, 2008.

  1. bwg

    bwg

    Joined:
    Aug 14, 2008
    Messages:
    62
    Likes Received:
    0
    Hi
    I buy OpenVox D410P and install my elastix

    [​IMG]

    This is zapata.conf
    [trunkgroups]

    [channels]
    context=from-pstn
    signalling=fxs_ks
    rxwink=300 ; Atlas seems to use long (250ms) winks
    usecallerid=yes
    hidecallerid=no
    callwaiting=yes
    usecallingpres=yes
    callwaitingcallerid=yes
    threewaycalling=yes
    transfer=yes
    canpark=yes
    cancallforward=yes
    callreturn=yes
    echocancel=yes
    echocancelwhenbridged=no
    faxdetect=incoming
    echotraining=800
    rxgain=0.0
    txgain=0.0
    callgroup=1
    pickupgroup=1

    ;Uncomment these lines if you have problems with the disconection of your analog lines
    ;busydetect=yes
    ;busycount=3


    immediate=no

    #include zapata_additional.conf
    #include zapata-channels.conf


    This is apata_additional.conf

    ;--------------------------------------------------------------------------------;
    ; Do NOT edit this file as it is auto-generated by FreePBX. All modifications to ;
    ; this file must be done via the web gui. There are alternative files to make ;
    ; custom modifications, details at: http://freepbx.org/configuration_files ;
    ;--------------------------------------------------------------------------------;
    ;




    This is zapata-channels.conf

    ; Autogenerated by /usr/sbin/genzaptelconf -- do not hand edit
    ; Zaptel Channels Configurations (zapata.conf)
    ;
    ; This is not intended to be a complete zapata.conf. Rather, it is intended
    ; to be #include-d by /etc/zapata.conf that will include the global settings
    ;

    ; Span 1: TE4/0/1 "T4XXP (PCI) Card 0 Span 1" (MASTER)
    group=0,11
    context=from-pstn
    switchtype = euroisdn
    signalling = pri_cpe
    channel => 1-15,17-31
    group=
    context=default

    ; Span 2: TE4/0/2 "T4XXP (PCI) Card 0 Span 2"
    group=0,12
    context=from-pstn
    switchtype = euroisdn
    signalling = pri_cpe
    channel => 32-46,48-62
    group=
    context=default

    ; Span 3: TE4/0/3 "T4XXP (PCI) Card 0 Span 3"
    group=0,13
    context=from-pstn
    switchtype = euroisdn
    signalling = pri_cpe
    channel => 63-77,79-93
    group=
    context=default

    ; Span 4: TE4/0/4 "T4XXP (PCI) Card 0 Span 4"
    group=0,14
    context=from-pstn
    switchtype = euroisdn
    signalling = pri_cpe
    channel => 94-108,110-124
    group=
    context=default


    How add new Trunk via Span1 and Span2
     

Share This Page