help ivr misc destinations

Discussion in 'General' started by netsfk, Dec 1, 2010.

  1. netsfk

    Joined:
    Jan 16, 2009
    Messages:
    197
    Likes Received:
    0
    I have an IVR in a box A with a route to misc destinatios that sends the call to a box B but the call does not go stay silent for 3 seconds and then I returned to the ivr


    Executing [9123@ivr-3:1] NoOp("SIP/4500-00000032", "Deleting: ") in new stack
    -- Executing [9123@ivr-3:2] Set("SIP/4500-00000032", "__NODEST=") in new stack
    -- Executing [9123@ivr-3:3] Goto("SIP/4500-00000032", "ext-miscdests,2,1") in new stack
    -- Goto (ext-miscdests,2,1)
    -- Executing [2@ext-miscdests:1] NoOp("SIP/4500-00000032", "MiscDest: cgs") in new stack
    -- Executing [2@ext-miscdests:2] Goto("SIP/4500-00000032", "from-internal,839123,1") in new stack
    -- Goto (from-internal,839123,1)
    -- Executing [839123@from-internal:1] Dial("SIP/4500-00000032", "IAX2/TRUNK/839123,90,tr") in new stack in new stack
    == Everyone is busy/congested at this time (1:0/0/1)
    -- Executing [839123@from-internal:2] Goto("SIP/4500-00000032", "ext-did,s,1") in new stack
    -- Goto (ext-did,s,1)
    -- Executing [s@ext-did:1] Set("SIP/4500-00000032", "__FROM_DID=s") in new stack
    -- Executing [s@ext-did:2] Set("SIP/4500-00000032", "CHANNEL(language)=es") in new stack
    -- Executing [s@ext-did:3] Gosub("SIP/4500-00000032", "app-blacklist-check,s,1") in new stack
    -- Executing [s@app-blacklist-check:1] GotoIf("SIP/4500-00000032", "0?blacklisted") in new stack
    -- Executing [s@app-blacklist-check:2] Set("SIP/4500-00000032", "CALLED_BLACKLIST=1") in new stack
    -- Executing [s@app-blacklist-check:3] Return("SIP/4500-00000032", "") in new stack
    -- Executing [s@ext-did:4] ExecIf("SIP/4500-00000032", "0 ?Set(CALLERID(name)=4500)") in new stack
    -- Executing [s@ext-did:5] Set("SIP/4500-00000032", "__CALLINGPRES_SV=allowed_not_screened") in new stack
    -- Executing [s@ext-did:6] Set("SIP/4500-00000032", "CALLERPRES()=allowed_not_screened") in new stack
    -- Executing [s@ext-did:7] Goto("SIP/4500-00000032", "ivr-3,s,1") in new stack
    -- Goto (ivr-3,s,1)
    -- Executing [s@ivr-3:1] Set("SIP/4500-00000032", "MSG=custom/menudebienvenida") in new stack
    -- Executing [s@ivr-3:2] Set("SIP/4500-00000032", "LOOPCOUNT=0") in new stack
    -- Executing [s@ivr-3:3] Set("SIP/4500-00000032", "__DIR-CONTEXT=default") in new stack
    -- Executing [s@ivr-3:4] Set("SIP/4500-00000032", "_IVR_CONTEXT_ivr-3=ivr-3") in new stack
    -- Executing [s@ivr-3:5] Set("SIP/4500-00000032", "_IVR_CONTEXT=ivr-3") in new stack
    -- Executing [s@ivr-3:6] GotoIf("SIP/4500-00000032", "1?begin") in new stack
    -- Goto (ivr-3,s,9)
    -- Executing [s@ivr-3:9] Set("SIP/4500-00000032", "TIMEOUT(digit)=3") in new stack
    -- Digit timeout set to 3.000
    -- Executing [s@ivr-3:10] Set("SIP/4500-00000032", "TIMEOUT(response)=60") in new stack
    -- Response timeout set to 60.000
    -- Executing [s@ivr-3:11] Set("SIP/4500-00000032", "__IVR_RETVM=") in new stack


    any ideas????
     

Share This Page