help installing fax in new install of elastix 1.6

Discussion in 'General' started by erickperez, Mar 5, 2010.

  1. erickperez

    Joined:
    Dec 3, 2009
    Messages:
    4
    Likes Received:
    0
    Hi,
    I installed elastix 1.6-12 with a sangoma AFT-B600-SH
    I configured my iax extension properly, in General the extension 2000 is setup as fax, and in the inbound route i have used "none" "nvfax" and "zaptel" and still i cannot get the fax working.
    However if i send a fax directly to extension 2000 (the fax) it works correctly.

    the part that is not working is the detection part. Any clues as to waht to look for in the command line?

    /etc/dahdi/system.conf
    fxsks=1
    echocanceller=oslec,1
    fxsks=2
    echocanceller=oslec,2

    /etc/asterisk/dahdi-channels.conf
    ; Span 1: WRTDM/0 "wrtdm Board 1" (MASTER)
    ;;; line="1 WRTDM/0/0 FXSKS"
    signalling=fxs_ks
    callerid=asreceived
    group=0
    context=from-pstn
    channel => 1
    callerid=
    group=
    context=default
    ;;; line="2 WRTDM/0/1 FXSKS"
    signalling=fxs_ks
    callerid=asreceived
    group=1
    context=from-pstn
    channel => 2
    callerid=
    group=
    context=default

    /etc/asterisk/chan_dahdi.conf
    [channels]
    language=es
    context=from-pstn
    signalling=fxs_ks
    rxwink=300 ; Atlas seems to use long (250ms) winks
    usecallerid=yes
    hidecallerid=no
    callwaiting=yes
    usecallingpres=yes
    callwaitingcallerid=yes
    threewaycalling=yes
    transfer=yes
    canpark=yes
    cancallforward=yes
    callreturn=yes
    echocancel=yes
    echocancelwhenbridged=no
    faxdetect=both
    echotraining=800
    rxgain=0.0
    txgain=0.0
    callgroup=1
    pickupgroup=1

    /etc/asterisk/iax_additional.conf
    [2000]
    deny=0.0.0.0/0.0.0.0
    disallow=all
    type=friend
    setvar=REALCALLERIDNUM=2000
    secret=12345
    qualify=yes
    port=4569
    permit=0.0.0.0/0.0.0.0
    transfer=no
    mailbox=2000@device
    host=dynamic
    dial=IAX2/2000
    context=from-internal
    callerid=device <2000>
    allow=ulaw
    accountcode=

    thanks,
     

Share This Page