FXO getting busy

Discussion in 'General' started by janil_kumar, Jun 24, 2010.

  1. janil_kumar

    Joined:
    Nov 15, 2007
    Messages:
    4
    Likes Received:
    0
    I am having an Elastix server with TDM400 with 4FXO and one number with 4 hunting lies. I am getting all lines are busy even though 2 people are calling outside at a time and no incoming calls are there. What can be the problem.
     
  2. Patrick_elx

    Joined:
    Dec 14, 2008
    Messages:
    1,120
    Likes Received:
    0
    did you look at your log to see a more detailed explanation of the busy rejection?
     
  3. jgutierrez

    Joined:
    Feb 28, 2008
    Messages:
    5,737
    Likes Received:
    0
    Re: Re:FXO getting busy

    I would think that you have busy tone detection issues.
    Edit /etc/asterisk/chan_dahdi.conf and uncomment the lines for:
    busydetect=yes
    busycount=8
    As you will see, it says 8 instead of 3, as it says by default.
    Then save and execute from the shell:
    asterisk -rx "module reload"

    If you want to be sure, after applying this solution, when you have the issue, execute from shell:
    asterisk -rx "core show channels verbose"
    It will tell you if asterisk is using or not the lines
     
  4. janil_kumar

    Joined:
    Nov 15, 2007
    Messages:
    4
    Likes Received:
    0
    I will check this when I go to office on Sunday and get back to you as soon as possible. Any way thanks for the immediate response. (Our weekend in the middle east is Friday and Saturday, Week begining is Sunday)
     

Share This Page