FAX through bridged Sangoma A101 and A200 problem

Discussion in 'General' started by tjthorson, Sep 8, 2010.

  1. tjthorson

    Joined:
    Dec 14, 2009
    Messages:
    14
    Likes Received:
    0
    OK - I hope this is an easy one. Elastix 2.0 - right out of the box. Sangoma A200 and A101 cards bridged. A few fax machines plugged into the fxs ports on the A200. Inbound faxing and bridging works fine. Outbound faxes do not work at all. A call log shows the system is detecting fax tones and trying to redirect it to system fax - which I dont want it to do. I am not using any asterisk or hylafax faxing on this box at all - only the bridged FXS fax lines to the outgoing PRI. How do i totally disable that fax detection? I have it turned off in the wanpipe2.conf file - and its off on the extension itself? Any ideas? Below is a typical call....

    Code:
    [Sep  8 08:26:19] VERBOSE[5432] chan_dahdi.c:     -- Starting simple switch on 'DAHDI/25-1'
    [Sep  8 08:26:29] VERBOSE[5432] pbx.c:     -- Executing [13122630124@from-internal:1] Macro("DAHDI/25-1", "user-callerid,SKIPTTL,") in new stack
    [Sep  8 08:26:29] VERBOSE[5432] pbx.c:     -- Executing [s@macro-user-callerid:1] Set("DAHDI/25-1", "AMPUSER=200") in new stack
    [Sep  8 08:26:29] VERBOSE[5432] pbx.c:     -- Executing [s@macro-user-callerid:2] GotoIf("DAHDI/25-1", "0?report") in new stack
    [Sep  8 08:26:29] VERBOSE[5432] pbx.c:     -- Executing [s@macro-user-callerid:3] ExecIf("DAHDI/25-1", "1?Set(REALCALLERIDNUM=200)") in new stack
    [Sep  8 08:26:29] VERBOSE[5432] pbx.c:     -- Executing [s@macro-user-callerid:4] Set("DAHDI/25-1", "AMPUSER=200") in new stack
    [Sep  8 08:26:29] VERBOSE[5432] pbx.c:     -- Executing [s@macro-user-callerid:5] Set("DAHDI/25-1", "AMPUSERCIDNAME=Executive FAX Inbound") in new stack
    [Sep  8 08:26:29] VERBOSE[5432] pbx.c:     -- Executing [s@macro-user-callerid:6] GotoIf("DAHDI/25-1", "0?report") in new stack
    [Sep  8 08:26:29] VERBOSE[5432] pbx.c:     -- Executing [s@macro-user-callerid:7] Set("DAHDI/25-1", "AMPUSERCID=200") in new stack
    [Sep  8 08:26:29] VERBOSE[5432] pbx.c:     -- Executing [s@macro-user-callerid:8] Set("DAHDI/25-1", "CALLERID(all)="Executive FAX Inbound" <200>") in new stack
    [Sep  8 08:26:29] VERBOSE[5432] pbx.c:     -- Executing [s@macro-user-callerid:9] ExecIf("DAHDI/25-1", "0?Set(CHANNEL(language)=)") in new stack
    [Sep  8 08:26:29] VERBOSE[5432] pbx.c:     -- Executing [s@macro-user-callerid:10] GotoIf("DAHDI/25-1", "1?continue") in new stack
    [Sep  8 08:26:29] VERBOSE[5432] pbx.c:     -- Goto (macro-user-callerid,s,19)
    [Sep  8 08:26:29] VERBOSE[5432] pbx.c:     -- Executing [s@macro-user-callerid:19] NoOp("DAHDI/25-1", "Using CallerID "Executive FAX Inbound" <200>") in new stack
    [Sep  8 08:26:29] VERBOSE[5432] pbx.c:     -- Executing [13122630124@from-internal:2] Set("DAHDI/25-1", "_NODEST=") in new stack
    [Sep  8 08:26:29] VERBOSE[5432] pbx.c:     -- Executing [13122630124@from-internal:3] Macro("DAHDI/25-1", "record-enable,200,OUT,") in new stack
    [Sep  8 08:26:29] VERBOSE[5432] pbx.c:     -- Executing [s@macro-record-enable:1] GotoIf("DAHDI/25-1", "1?check") in new stack
    [Sep  8 08:26:29] VERBOSE[5432] pbx.c:     -- Goto (macro-record-enable,s,4)
    [Sep  8 08:26:29] VERBOSE[5432] pbx.c:     -- Executing [s@macro-record-enable:4] ExecIf("DAHDI/25-1", "0?MacroExit()") in new stack
    [Sep  8 08:26:29] VERBOSE[5432] pbx.c:     -- Executing [s@macro-record-enable:5] GotoIf("DAHDI/25-1", "0?Group:OUT") in new stack
    [Sep  8 08:26:29] VERBOSE[5432] pbx.c:     -- Goto (macro-record-enable,s,15)
    [Sep  8 08:26:29] VERBOSE[5432] pbx.c:     -- Executing [s@macro-record-enable:15] GotoIf("DAHDI/25-1", "0?IN") in new stack
    [Sep  8 08:26:29] VERBOSE[5432] pbx.c:     -- Executing [s@macro-record-enable:16] ExecIf("DAHDI/25-1", "1?MacroExit()") in new stack
    [Sep  8 08:26:29] VERBOSE[5432] pbx.c:     -- Executing [13122630124@from-internal:4] Macro("DAHDI/25-1", "dialout-trunk,1,13122630124,,") in new stack
    [Sep  8 08:26:29] VERBOSE[5432] pbx.c:     -- Executing [s@macro-dialout-trunk:1] Set("DAHDI/25-1", "DIAL_TRUNK=1") in new stack
    [Sep  8 08:26:29] VERBOSE[5432] pbx.c:     -- Executing [s@macro-dialout-trunk:2] GosubIf("DAHDI/25-1", "0?sub-pincheck,s,1") in new stack
    [Sep  8 08:26:29] VERBOSE[5432] pbx.c:     -- Executing [s@macro-dialout-trunk:3] GotoIf("DAHDI/25-1", "0?disabletrunk,1") in new stack
    [Sep  8 08:26:29] VERBOSE[5432] pbx.c:     -- Executing [s@macro-dialout-trunk:4] Set("DAHDI/25-1", "DIAL_NUMBER=13122630124") in new stack
    [Sep  8 08:26:29] VERBOSE[5432] pbx.c:     -- Executing [s@macro-dialout-trunk:5] Set("DAHDI/25-1", "DIAL_TRUNK_OPTIONS=tr") in new stack
    [Sep  8 08:26:29] VERBOSE[5432] pbx.c:     -- Executing [s@macro-dialout-trunk:6] Set("DAHDI/25-1", "OUTBOUND_GROUP=OUT_1") in new stack
    [Sep  8 08:26:29] VERBOSE[5432] pbx.c:     -- Executing [s@macro-dialout-trunk:7] GotoIf("DAHDI/25-1", "0?nomax") in new stack
    [Sep  8 08:26:29] VERBOSE[5432] pbx.c:     -- Executing [s@macro-dialout-trunk:8] GotoIf("DAHDI/25-1", "0?chanfull") in new stack
    [Sep  8 08:26:29] VERBOSE[5432] pbx.c:     -- Executing [s@macro-dialout-trunk:9] GotoIf("DAHDI/25-1", "0?skipoutcid") in new stack
    [Sep  8 08:26:29] VERBOSE[5432] pbx.c:     -- Executing [s@macro-dialout-trunk:10] Set("DAHDI/25-1", "DIAL_TRUNK_OPTIONS=") in new stack
    [Sep  8 08:26:29] VERBOSE[5432] pbx.c:     -- Executing [s@macro-dialout-trunk:11] Macro("DAHDI/25-1", "outbound-callerid,1") in new stack
    [Sep  8 08:26:29] VERBOSE[5432] pbx.c:     -- Executing [s@macro-outbound-callerid:1] ExecIf("DAHDI/25-1", "0?Set(CALLERPRES()=)") in new stack
    [Sep  8 08:26:29] VERBOSE[5432] pbx.c:     -- Executing [s@macro-outbound-callerid:2] ExecIf("DAHDI/25-1", "0?Set(REALCALLERIDNUM=200)") in new stack
    [Sep  8 08:26:29] VERBOSE[5432] pbx.c:     -- Executing [s@macro-outbound-callerid:3] GotoIf("DAHDI/25-1", "1?normcid") in new stack
    [Sep  8 08:26:29] VERBOSE[5432] pbx.c:     -- Goto (macro-outbound-callerid,s,6)
    [Sep  8 08:26:29] VERBOSE[5432] pbx.c:     -- Executing [s@macro-outbound-callerid:6] Set("DAHDI/25-1", "USEROUTCID=6307664199") in new stack
    [Sep  8 08:26:29] VERBOSE[5432] pbx.c:     -- Executing [s@macro-outbound-callerid:7] Set("DAHDI/25-1", "EMERGENCYCID=") in new stack
    [Sep  8 08:26:29] VERBOSE[5432] pbx.c:     -- Executing [s@macro-outbound-callerid:8] Set("DAHDI/25-1", "TRUNKOUTCID=6307663570") in new stack
    [Sep  8 08:26:29] VERBOSE[5432] pbx.c:     -- Executing [s@macro-outbound-callerid:9] GotoIf("DAHDI/25-1", "1?trunkcid") in new stack
    [Sep  8 08:26:29] VERBOSE[5432] pbx.c:     -- Goto (macro-outbound-callerid,s,12)
    [Sep  8 08:26:29] VERBOSE[5432] pbx.c:     -- Executing [s@macro-outbound-callerid:12] ExecIf("DAHDI/25-1", "1?Set(CALLERID(all)=6307663570)") in new stack
    [Sep  8 08:26:29] VERBOSE[5432] pbx.c:     -- Executing [s@macro-outbound-callerid:13] ExecIf("DAHDI/25-1", "1?Set(CALLERID(all)=6307664199)") in new stack
    [Sep  8 08:26:29] VERBOSE[5432] pbx.c:     -- Executing [s@macro-outbound-callerid:14] ExecIf("DAHDI/25-1", "0?Set(CALLERID(all)=)") in new stack
    [Sep  8 08:26:29] VERBOSE[5432] pbx.c:     -- Executing [s@macro-outbound-callerid:15] ExecIf("DAHDI/25-1", "0?Set(CALLERPRES()=prohib_passed_screen)") in new stack
    [Sep  8 08:26:29] VERBOSE[5432] pbx.c:     -- Executing [s@macro-dialout-trunk:12] ExecIf("DAHDI/25-1", "1?AGI(fixlocalprefix)") in new stack
    [Sep  8 08:26:29] VERBOSE[5432] res_agi.c:     -- Launched AGI Script /var/lib/asterisk/agi-bin/fixlocalprefix
    [Sep  8 08:26:29] VERBOSE[5432] res_agi.c:   == fixlocalprefix: Dialpattern 1nxxnxxxxxx matched. 13122630124 -> 13122630124
    [Sep  8 08:26:29] VERBOSE[5432] res_agi.c:     -- <DAHDI/25-1>AGI Script fixlocalprefix completed, returning 0
    [Sep  8 08:26:29] VERBOSE[5432] pbx.c:     -- Executing [s@macro-dialout-trunk:13] Set("DAHDI/25-1", "OUTNUM=13122630124") in new stack
    [Sep  8 08:26:29] VERBOSE[5432] pbx.c:     -- Executing [s@macro-dialout-trunk:14] Set("DAHDI/25-1", "custom=DAHDI/g0") in new stack
    [Sep  8 08:26:29] VERBOSE[5432] pbx.c:     -- Executing [s@macro-dialout-trunk:15] ExecIf("DAHDI/25-1", "0?Set(DIAL_TRUNK_OPTIONS=M(setmusic^))") in new stack
    [Sep  8 08:26:29] VERBOSE[5432] pbx.c:     -- Executing [s@macro-dialout-trunk:16] Macro("DAHDI/25-1", "dialout-trunk-predial-hook,") in new stack
    [Sep  8 08:26:29] VERBOSE[5432] pbx.c:     -- Executing [s@macro-dialout-trunk-predial-hook:1] MacroExit("DAHDI/25-1", "") in new stack
    [Sep  8 08:26:29] VERBOSE[5432] pbx.c:     -- Executing [s@macro-dialout-trunk:17] GotoIf("DAHDI/25-1", "0?bypass,1") in new stack
    [Sep  8 08:26:29] VERBOSE[5432] pbx.c:     -- Executing [s@macro-dialout-trunk:18] GotoIf("DAHDI/25-1", "0?customtrunk") in new stack
    [Sep  8 08:26:29] VERBOSE[5432] pbx.c:     -- Executing [s@macro-dialout-trunk:19] Dial("DAHDI/25-1", "DAHDI/g0/13122630124,300,") in new stack
    [Sep  8 08:26:29] VERBOSE[5432] chan_dahdi.c:     -- Requested transfer capability: 0x00 - SPEECH
    [Sep  8 08:26:29] VERBOSE[5432] app_dial.c:     -- Called g0/13122630124
    [Sep  8 08:26:29] VERBOSE[5432] app_dial.c:     -- DAHDI/1-1 is proceeding passing it to DAHDI/25-1
    [Sep  8 08:26:30] VERBOSE[5432] chan_dahdi.c:     -- Redirecting DAHDI/25-1 to fax extension
    [Sep  8 08:26:30] VERBOSE[5432] chan_dahdi.c:     -- Hungup 'DAHDI/1-1'
    [Sep  8 08:26:30] VERBOSE[5432] app_macro.c:   == Spawn extension (from-internal, fax, 1) exited non-zero on 'DAHDI/25-1' in macro 'dialout-trunk'
    [Sep  8 08:26:30] VERBOSE[5432] pbx.c:   == Spawn extension (from-internal, fax, 1) exited non-zero on 'DAHDI/25-1'
    [Sep  8 08:26:30] VERBOSE[5432] pbx.c:     -- Executing [fax@from-internal:1] Macro("DAHDI/25-1", "user-callerid,SKIPTTL,") in new stack
    [Sep  8 08:26:30] VERBOSE[5432] pbx.c:     -- Executing [s@macro-user-callerid:1] Set("DAHDI/25-1", "AMPUSER=200") in new stack
    [Sep  8 08:26:30] VERBOSE[5432] pbx.c:     -- Executing [s@macro-user-callerid:2] GotoIf("DAHDI/25-1", "0?report") in new stack
    [Sep  8 08:26:30] VERBOSE[5432] pbx.c:     -- Executing [s@macro-user-callerid:3] ExecIf("DAHDI/25-1", "0?Set(REALCALLERIDNUM=6307664199)") in new stack
    [Sep  8 08:26:30] VERBOSE[5432] pbx.c:     -- Executing [s@macro-user-callerid:4] Set("DAHDI/25-1", "AMPUSER=200") in new stack
    [Sep  8 08:26:30] VERBOSE[5432] pbx.c:     -- Executing [s@macro-user-callerid:5] Set("DAHDI/25-1", "AMPUSERCIDNAME=Executive FAX Inbound") in new stack
    [Sep  8 08:26:30] VERBOSE[5432] pbx.c:     -- Executing [s@macro-user-callerid:6] GotoIf("DAHDI/25-1", "0?report") in new stack
    [Sep  8 08:26:30] VERBOSE[5432] pbx.c:     -- Executing [s@macro-user-callerid:7] Set("DAHDI/25-1", "AMPUSERCID=200") in new stack
    [Sep  8 08:26:30] VERBOSE[5432] pbx.c:     -- Executing [s@macro-user-callerid:8] Set("DAHDI/25-1", "CALLERID(all)="Executive FAX Inbound" <200>") in new stack
    [Sep  8 08:26:30] VERBOSE[5432] pbx.c:     -- Executing [s@macro-user-callerid:9] ExecIf("DAHDI/25-1", "0?Set(CHANNEL(language)=)") in new stack
    [Sep  8 08:26:30] VERBOSE[5432] pbx.c:     -- Executing [s@macro-user-callerid:10] GotoIf("DAHDI/25-1", "1?continue") in new stack
    [Sep  8 08:26:30] VERBOSE[5432] pbx.c:     -- Goto (macro-user-callerid,s,19)
    [Sep  8 08:26:30] VERBOSE[5432] pbx.c:     -- Executing [s@macro-user-callerid:19] NoOp("DAHDI/25-1", "Using CallerID "Executive FAX Inbound" <200>") in new stack
    [Sep  8 08:26:30] VERBOSE[5432] pbx.c:     -- Executing [fax@from-internal:2] Set("DAHDI/25-1", "_NODEST=") in new stack
    [Sep  8 08:26:30] VERBOSE[5432] pbx.c:     -- Executing [fax@from-internal:3] Macro("DAHDI/25-1", "record-enable,200,OUT,") in new stack
    [Sep  8 08:26:30] VERBOSE[5432] pbx.c:     -- Executing [s@macro-record-enable:1] GotoIf("DAHDI/25-1", "1?check") in new stack
    [Sep  8 08:26:30] VERBOSE[5432] pbx.c:     -- Goto (macro-record-enable,s,4)
    [Sep  8 08:26:30] VERBOSE[5432] pbx.c:     -- Executing [s@macro-record-enable:4] ExecIf("DAHDI/25-1", "0?MacroExit()") in new stack
    [Sep  8 08:26:30] VERBOSE[5432] pbx.c:     -- Executing [s@macro-record-enable:5] GotoIf("DAHDI/25-1", "0?Group:OUT") in new stack
    [Sep  8 08:26:30] VERBOSE[5432] pbx.c:     -- Goto (macro-record-enable,s,15)
    [Sep  8 08:26:30] VERBOSE[5432] pbx.c:     -- Executing [s@macro-record-enable:15] GotoIf("DAHDI/25-1", "0?IN") in new stack
    [Sep  8 08:26:30] VERBOSE[5432] pbx.c:     -- Executing [s@macro-record-enable:16] ExecIf("DAHDI/25-1", "1?MacroExit()") in new stack
    [Sep  8 08:26:30] VERBOSE[5432] pbx.c:     -- Executing [fax@from-internal:4] Macro("DAHDI/25-1", "dialout-trunk,1,fax,,") in new stack
    [Sep  8 08:26:30] VERBOSE[5432] pbx.c:     -- Executing [s@macro-dialout-trunk:1] Set("DAHDI/25-1", "DIAL_TRUNK=1") in new stack
    [Sep  8 08:26:30] VERBOSE[5432] pbx.c:     -- Executing [s@macro-dialout-trunk:2] GosubIf("DAHDI/25-1", "0?sub-pincheck,s,1") in new stack
    [Sep  8 08:26:30] VERBOSE[5432] pbx.c:     -- Executing [s@macro-dialout-trunk:3] GotoIf("DAHDI/25-1", "0?disabletrunk,1") in new stack
    [Sep  8 08:26:30] VERBOSE[5432] pbx.c:     -- Executing [s@macro-dialout-trunk:4] Set("DAHDI/25-1", "DIAL_NUMBER=fax") in new stack
    [Sep  8 08:26:30] VERBOSE[5432] pbx.c:     -- Executing [s@macro-dialout-trunk:5] Set("DAHDI/25-1", "DIAL_TRUNK_OPTIONS=tr") in new stack
    [Sep  8 08:26:30] VERBOSE[5432] pbx.c:     -- Executing [s@macro-dialout-trunk:6] Set("DAHDI/25-1", "OUTBOUND_GROUP=OUT_1") in new stack
    [Sep  8 08:26:30] VERBOSE[5432] pbx.c:     -- Executing [s@macro-dialout-trunk:7] GotoIf("DAHDI/25-1", "0?nomax") in new stack
    [Sep  8 08:26:30] VERBOSE[5432] pbx.c:     -- Executing [s@macro-dialout-trunk:8] GotoIf("DAHDI/25-1", "0?chanfull") in new stack
    [Sep  8 08:26:30] VERBOSE[5432] pbx.c:     -- Executing [s@macro-dialout-trunk:9] GotoIf("DAHDI/25-1", "0?skipoutcid") in new stack
    [Sep  8 08:26:30] VERBOSE[5432] pbx.c:     -- Executing [s@macro-dialout-trunk:10] Set("DAHDI/25-1", "DIAL_TRUNK_OPTIONS=") in new stack
    [Sep  8 08:26:30] VERBOSE[5432] pbx.c:     -- Executing [s@macro-dialout-trunk:11] Macro("DAHDI/25-1", "outbound-callerid,1") in new stack
    [Sep  8 08:26:30] VERBOSE[5432] pbx.c:     -- Executing [s@macro-outbound-callerid:1] ExecIf("DAHDI/25-1", "0?Set(CALLERPRES()=)") in new stack
    [Sep  8 08:26:30] VERBOSE[5432] pbx.c:     -- Executing [s@macro-outbound-callerid:2] ExecIf("DAHDI/25-1", "0?Set(REALCALLERIDNUM=200)") in new stack
    [Sep  8 08:26:30] VERBOSE[5432] pbx.c:     -- Executing [s@macro-outbound-callerid:3] GotoIf("DAHDI/25-1", "1?normcid") in new stack
    [Sep  8 08:26:30] VERBOSE[5432] pbx.c:     -- Goto (macro-outbound-callerid,s,6)
    [Sep  8 08:26:30] VERBOSE[5432] pbx.c:     -- Executing [s@macro-outbound-callerid:6] Set("DAHDI/25-1", "USEROUTCID=6307664199") in new stack
    [Sep  8 08:26:30] VERBOSE[5432] pbx.c:     -- Executing [s@macro-outbound-callerid:7] Set("DAHDI/25-1", "EMERGENCYCID=") in new stack
    [Sep  8 08:26:30] VERBOSE[5432] pbx.c:     -- Executing [s@macro-outbound-callerid:8] Set("DAHDI/25-1", "TRUNKOUTCID=6307663570") in new stack
    [Sep  8 08:26:30] VERBOSE[5432] pbx.c:     -- Executing [s@macro-outbound-callerid:9] GotoIf("DAHDI/25-1", "1?trunkcid") in new stack
    [Sep  8 08:26:30] VERBOSE[5432] pbx.c:     -- Goto (macro-outbound-callerid,s,12)
    [Sep  8 08:26:30] VERBOSE[5432] pbx.c:     -- Executing [s@macro-outbound-callerid:12] ExecIf("DAHDI/25-1", "1?Set(CALLERID(all)=6307663570)") in new stack
    [Sep  8 08:26:30] VERBOSE[5432] pbx.c:     -- Executing [s@macro-outbound-callerid:13] ExecIf("DAHDI/25-1", "1?Set(CALLERID(all)=6307664199)") in new stack
    [Sep  8 08:26:30] VERBOSE[5432] pbx.c:     -- Executing [s@macro-outbound-callerid:14] ExecIf("DAHDI/25-1", "0?Set(CALLERID(all)=)") in new stack
    [Sep  8 08:26:30] VERBOSE[5432] pbx.c:     -- Executing [s@macro-outbound-callerid:15] ExecIf("DAHDI/25-1", "0?Set(CALLERPRES()=prohib_passed_screen)") in new stack
    [Sep  8 08:26:30] VERBOSE[5432] pbx.c:     -- Executing [s@macro-dialout-trunk:12] ExecIf("DAHDI/25-1", "1?AGI(fixlocalprefix)") in new stack
    [Sep  8 08:26:30] VERBOSE[5432] res_agi.c:     -- Launched AGI Script /var/lib/asterisk/agi-bin/fixlocalprefix
    [Sep  8 08:26:30] VERBOSE[5432] res_agi.c:     -- <DAHDI/25-1>AGI Script fixlocalprefix completed, returning 0
    [Sep  8 08:26:30] VERBOSE[5432] pbx.c:     -- Executing [s@macro-dialout-trunk:13] Set("DAHDI/25-1", "OUTNUM=fax") in new stack
    [Sep  8 08:26:30] VERBOSE[5432] pbx.c:     -- Executing [s@macro-dialout-trunk:14] Set("DAHDI/25-1", "custom=DAHDI/g0") in new stack
    [Sep  8 08:26:30] VERBOSE[5432] pbx.c:     -- Executing [s@macro-dialout-trunk:15] ExecIf("DAHDI/25-1", "0?Set(DIAL_TRUNK_OPTIONS=M(setmusic^))") in new stack
    [Sep  8 08:26:30] VERBOSE[5432] pbx.c:     -- Executing [s@macro-dialout-trunk:16] Macro("DAHDI/25-1", "dialout-trunk-predial-hook,") in new stack
    [Sep  8 08:26:30] VERBOSE[5432] pbx.c:     -- Executing [s@macro-dialout-trunk-predial-hook:1] MacroExit("DAHDI/25-1", "") in new stack
    [Sep  8 08:26:30] VERBOSE[5432] pbx.c:     -- Executing [s@macro-dialout-trunk:17] GotoIf("DAHDI/25-1", "0?bypass,1") in new stack
    [Sep  8 08:26:30] VERBOSE[5432] pbx.c:     -- Executing [s@macro-dialout-trunk:18] GotoIf("DAHDI/25-1", "0?customtrunk") in new stack
    [Sep  8 08:26:30] VERBOSE[5432] pbx.c:     -- Executing [s@macro-dialout-trunk:19] Dial("DAHDI/25-1", "DAHDI/g0/fax,300,") in new stack
    [Sep  8 08:26:30] VERBOSE[5432] chan_dahdi.c:     -- Requested transfer capability: 0x00 - SPEECH
    [Sep  8 08:26:30] WARNING[5432] chan_dahdi.c: Unrecognized pridialplan NPI modifier: a
    [Sep  8 08:26:30] VERBOSE[5432] app_dial.c:     -- Called g0/fax
    [Sep  8 08:26:30] VERBOSE[3766] chan_dahdi.c:     -- Channel 0/1, span 1 got hangup, cause 100
    [Sep  8 08:26:30] WARNING[5432] app_dial.c: Unable to forward voice or dtmf
    [Sep  8 08:26:30] VERBOSE[5432] chan_dahdi.c:     -- Hungup 'DAHDI/1-1'
    [Sep  8 08:26:30] VERBOSE[5432] app_dial.c:   == Everyone is busy/congested at this time (1:0/0/1)
    [Sep  8 08:26:30] VERBOSE[5432] pbx.c:     -- Executing [s@macro-dialout-trunk:20] NoOp("DAHDI/25-1", "Dial failed for some reason with DIALSTATUS = CHANUNAVAIL and HANGUPCAUSE = 100") in new stack
    [Sep  8 08:26:30] VERBOSE[5432] pbx.c:     -- Executing [s@macro-dialout-trunk:21] Goto("DAHDI/25-1", "s-CHANUNAVAIL,1") in new stack
    [Sep  8 08:26:30] VERBOSE[5432] pbx.c:     -- Goto (macro-dialout-trunk,s-CHANUNAVAIL,1)
    [Sep  8 08:26:30] VERBOSE[5432] pbx.c:     -- Executing [s-CHANUNAVAIL@macro-dialout-trunk:1] Set("DAHDI/25-1", "RC=100") in new stack
    [Sep  8 08:26:30] VERBOSE[5432] pbx.c:     -- Executing [s-CHANUNAVAIL@macro-dialout-trunk:2] Goto("DAHDI/25-1", "100,1") in new stack
    [Sep  8 08:26:30] VERBOSE[5432] pbx.c:     -- Goto (macro-dialout-trunk,100,1)
    [Sep  8 08:26:30] VERBOSE[5432] pbx.c:     -- Executing [100@macro-dialout-trunk:1] Goto("DAHDI/25-1", "continue,1") in new stack
    [Sep  8 08:26:30] VERBOSE[5432] pbx.c:     -- Goto (macro-dialout-trunk,continue,1)
    [Sep  8 08:26:30] VERBOSE[5432] pbx.c:     -- Executing [continue@macro-dialout-trunk:1] GotoIf("DAHDI/25-1", "1?noreport") in new stack
    [Sep  8 08:26:30] VERBOSE[5432] pbx.c:     -- Goto (macro-dialout-trunk,continue,3)
    [Sep  8 08:26:30] VERBOSE[5432] pbx.c:     -- Executing [continue@macro-dialout-trunk:3] NoOp("DAHDI/25-1", "TRUNK Dial failed due to CHANUNAVAIL HANGUPCAUSE: 100 - failing through to other trunks") in new stack
    [Sep  8 08:26:30] VERBOSE[5432] pbx.c:     -- Executing [continue@macro-dialout-trunk:4] Set("DAHDI/25-1", "CALLERID(number)=200") in new stack
    [Sep  8 08:26:30] VERBOSE[5432] pbx.c:     -- Executing [fax@from-internal:5] Macro("DAHDI/25-1", "outisbusy,") in new stack
    [Sep  8 08:26:30] VERBOSE[5432] pbx.c:     -- Executing [s@macro-outisbusy:1] Progress("DAHDI/25-1", "") in new stack
    [Sep  8 08:26:30] VERBOSE[5432] pbx.c:     -- Executing [s@macro-outisbusy:2] GotoIf("DAHDI/25-1", "0?emergency,1") in new stack
    [Sep  8 08:26:30] VERBOSE[5432] pbx.c:     -- Executing [s@macro-outisbusy:3] GotoIf("DAHDI/25-1", "0?intracompany,1") in new stack
    [Sep  8 08:26:30] VERBOSE[5432] pbx.c:     -- Executing [s@macro-outisbusy:4] Playback("DAHDI/25-1", "all-circuits-busy-now&pls-try-call-later, noanswer") in new stack
    [Sep  8 08:26:30] VERBOSE[5432] file.c:     -- <DAHDI/25-1> Playing 'all-circuits-busy-now.gsm' (language 'en')
    [Sep  8 08:26:32] VERBOSE[5432] file.c:     -- <DAHDI/25-1> Playing 'pls-try-call-later.gsm' (language 'en')
    [Sep  8 08:26:34] VERBOSE[5432] pbx.c:     -- Executing [s@macro-outisbusy:5] Congestion("DAHDI/25-1", "20") in new stack
    [Sep  8 08:26:43] VERBOSE[5432] app_macro.c:   == Spawn extension (macro-outisbusy, s, 5) exited non-zero on 'DAHDI/25-1' in macro 'outisbusy'
    [Sep  8 08:26:43] VERBOSE[5432] pbx.c:   == Spawn extension (from-internal, fax, 5) exited non-zero on 'DAHDI/25-1'
    [Sep  8 08:26:43] VERBOSE[5432] pbx.c:     -- Executing [h@from-internal:1] Macro("DAHDI/25-1", "hangupcall") in new stack
    [Sep  8 08:26:43] VERBOSE[5432] pbx.c:     -- Executing [s@macro-hangupcall:1] GotoIf("DAHDI/25-1", "1?skiprg") in new stack
    [Sep  8 08:26:43] VERBOSE[5432] pbx.c:     -- Goto (macro-hangupcall,s,4)
    [Sep  8 08:26:43] VERBOSE[5432] pbx.c:     -- Executing [s@macro-hangupcall:4] GotoIf("DAHDI/25-1", "1?skipblkvm") in new stack
    [Sep  8 08:26:43] VERBOSE[5432] pbx.c:     -- Goto (macro-hangupcall,s,7)
    [Sep  8 08:26:43] VERBOSE[5432] pbx.c:     -- Executing [s@macro-hangupcall:7] GotoIf("DAHDI/25-1", "1?theend") in new stack
    [Sep  8 08:26:43] VERBOSE[5432] pbx.c:     -- Goto (macro-hangupcall,s,9)
    [Sep  8 08:26:43] VERBOSE[5432] pbx.c:     -- Executing [s@macro-hangupcall:9] Hangup("DAHDI/25-1", "") in new stack
    [Sep  8 08:26:43] VERBOSE[5432] app_macro.c:   == Spawn extension (macro-hangupcall, s, 9) exited non-zero on 'DAHDI/25-1' in macro 'hangupcall'
    [Sep  8 08:26:43] VERBOSE[5432] pbx.c:   == Spawn extension (from-internal, h, 1) exited non-zero on 'DAHDI/25-1'
    [Sep  8 08:26:43] VERBOSE[5432] chan_dahdi.c:     -- Hungup 'DAHDI/25-1'
     
  2. tjthorson

    Joined:
    Dec 14, 2009
    Messages:
    14
    Likes Received:
    0
    FIXED - answered my own question. Even though FAX is disabled in the GUI, you also must change the chan_dahdi.conf file to

    FAXDETECT=INCOMING

    to

    FAXDETECT=NO
     
  3. jiahau

    Joined:
    Feb 23, 2011
    Messages:
    5
    Likes Received:
    0
    This saved my life ;)

    Found out too that OUTNUM=fax instead of the actual called party number.

    Not sure how it happened and I tried to default back all the settings by disabling all the fax features via the web GUI. It didn't work till I found this thread ;)

    Manually changed the chan_dahdi.conf and it worked back!

    Thanks!
     

Share This Page