fatal error

Discussion in 'General' started by arashino, Jun 24, 2010.

  1. arashino

    Joined:
    Jun 14, 2010
    Messages:
    118
    Likes Received:
    0
    hi everyone

    I have trixbox2.8.0.3. when i type http://server's ip my output is:

    Cannot write trixbox_Language:english
    to file (cache/sessionsFile.txt)


    and when i type http://ip/admin my output is:
    FATAL ERROR
    DB Error: connect failed


    what should i do?thanks in advance
     
  2. dicko

    Joined:
    Oct 24, 2008
    Messages:
    4,099
    Likes Received:
    0
    Go to the Trixbox Forum perhaps?

    (none of us have Trickybox here :) )

    p.s.

    and yes, feel free to ". . . know that you have a different option", dump that green crap and install Elastix, then we will gladly help you.

    dicko
     
  3. arashino

    Joined:
    Jun 14, 2010
    Messages:
    118
    Likes Received:
    0
    thanks for your recommendation. i have 2servers one trixbox and one elastix1.6.
    in this situation i have a sangoma a200 card therefor i have to use trixbox. if you can help me for installing sangoma a200 on elastix 1.6 i promise switch to elastix1.6.
     
  4. arashino

    Joined:
    Jun 14, 2010
    Messages:
    118
    Likes Received:
    0
    hi everyone

    i have switched to elastix1.6 and install sangoma a200 correctly :)

    for installing sangoma a200 on elastix 1.6:

    1- first login with root and run "lspci" . you should see sangoma a200 in the output
    2- run "wancfg_dahdi" and in the wizard accept default value . notice that when ask "would you like wanroute to automatically start on startup?" you should response with "yes".
    3- finally save changes with select "restart wanpipe and asterisk"

    now in system's tab and in the hardware detection you should see sangoma a200 card with in use port.
     

Share This Page