Fast Busy

techieg

Joined
Oct 8, 2007
Messages
81
Likes
0
Points
0
#1
Something weird is going on; I setup 0.9beta2 with no zaptel cards setup on it just pure SIP and was able to make and receive calls yesterday. I turned the system back on today and I cannot make calls anymore. The CLI is as follows;

host1*CLI> -- Executing [99085461@from-internal:1] Set("SIP/1000-b7801d38", "DID=99085461") in new stack
No such command '-- Executing' (type 'help' for help)
host1*CLI> -- Executing [99085461@from-internal:2] Goto("SIP/1000-b7801d38", "s|1") in new stack
host1*CLI> -- Goto (from-internal,s,1)
No such command '-- Executing' (type 'help' for help)
No such command '-- Goto' (type 'help' for help)
host1*CLI> -- Executing [s@from-internal:1] NoOp("SIP/1000-b7801d38", "Entering from-zaptel with DID == 99085461") in new stack
host1*CLI> -- Executing [s@from-internal:2] Ringing("SIP/1000-b7801d38", "") in new stack
No such command '-- Executing' (type 'help' for help)
No such command '-- Executing' (type 'help' for help)
host1*CLI> -- Executing [s@from-internal:3] Set("SIP/1000-b7801d38", "DID=99085461") in new stack
No such command '-- Executing' (type 'help' for help)
host1*CLI> -- Executing [s@from-internal:4] NoOp("SIP/1000-b7801d38", "DID is now 99085461") in new stack
host1*CLI> -- Executing [s@from-internal:5] GotoIf("SIP/1000-b7801d38", "0zapok:notzap") in new stack
host1*CLI> -- Goto (from-internal,s,6)
No such command '-- Executing' (type 'help' for help)
No such command '-- Goto' (type 'help' for help)
host1*CLI> -- Executing [s@from-internal:6] Goto("SIP/1000-b7801d38", "from-pstn|99085461|1") in new stack
No such command '-- Executing' (type 'help' for help)
-- Executing [99085461@from-internal:1] Set("SIP/1000-b7801d38", "DID=99085461") in new stack
-- Executing [99085461@from-internal:2] Goto("SIP/1000-b7801d38", "s|1") in new stack
-- Goto (from-internal,s,1)
-- Executing [s@from-internal:1] NoOp("SIP/1000-b7801d38", "Entering from-zaptel with DID == 99085461") in new stack
-- Executing [s@from-internal:2] Ringing("SIP/1000-b7801d38", "") in new stack
-- Executing [s@from-internal:3] Set("SIP/1000-b7801d38", "DID=99085461") in new stack
-- Executing [s@from-internal:4] NoOp("SIP/1000-b7801d38", "DID is now 99085461") in new stack
-- Executing [s@from-internal:5] GotoIf("SIP/1000-b7801d38", "0?zapok:notzap") in new stack
-- Goto (from-internal,s,6)tn,99085461,1)
-- Executing [s@from-internal:6] Goto("SIP/1000-b7801d38", "from-pstn|99085461|1") in new stack
-- Goto (from-pstn,99085461,1)
host1*CLI> -- Goto (from-pstn,99085461,1)

Any ideas?


Thanx.
 

cowboy47

Joined
Jun 14, 2007
Messages
276
Likes
0
Points
0
#2
I saw something similiar when I tried to put a different caller ID and mask the number of the SIP line. Once I put the correct caller ID my fast busy went away.
 

Members online

No members online now.

Latest posts

Forum statistics

Threads
30,915
Messages
130,920
Members
17,595
Latest member
feparra121
Top