Error E1- Xorcom

Discussion in 'General' started by Luis Diego, Nov 1, 2010.

  1. Luis Diego

    Joined:
    Nov 1, 2010
    Messages:
    237
    Likes Received:
    0
    Descripción del Problema.-


    Tengo un E1 conectado a mi Xorcom, pbx con asterisk 1.4.29, la conexión es muy intermitente, un rato di funciona y otro momento no me funciona, probé con otro e1 también de maxcom y me funciona perfectamente, pero cuando hacen test de maxcom el E1 que no me funciona pues sale positivo en las pruebas,
    Y lo más raro es lo siguiente:





    [Oct 29 15:31:17] DEBUG[3785] chan_dahdi.c: no MFC/R2 category specified for chan DAHDI/32-1, using default National Subscriber
    [Oct 29 15:31:17] DEBUG[3785] chan_dahdi.c: Chan 32 - Attempting to make call (ANI=1600, DNIS=2236100, category=National Subscriber)
    [Oct 29 15:31:17] DEBUG[3785] chan_dahdi.c: Chan 32 - Call started at Fri Oct 29 15:31:17 2010 on chan 32 [openr2 version 1.2.0, revision (release)]
    [Oct 29 15:31:17] DEBUG[3785] chan_dahdi.c: Chan 32 - CAS Tx >> [SEIZE] 0x00
    [Oct 29 15:31:17] DEBUG[3785] chan_dahdi.c: Chan 32 - CAS Raw Tx >> 0x01
    [Oct 29 15:31:17] VERBOSE[3785] logger.c: -- Called g12/2236100
    [Oct 29 15:31:17] DEBUG[3610] chan_dahdi.c: Chan 37 - Bits changed from 0x08 to 0x0C
    [Oct 29 15:31:17] DEBUG[3610] chan_dahdi.c: Chan 37 - CAS Rx << [BLOCK] 0x0C
    [Oct 29 15:31:17] NOTICE[3610] chan_dahdi.c: Far end blocked on chan 37
    [Oct 29 15:31:25] DEBUG[3785] chan_dahdi.c: Chan 32 - calling timer 2 (r2_seize) callback
    [Oct 29 15:31:25] WARNING[3785] chan_dahdi.c: Chan 32 - Seize Timeout Expired!
    [Oct 29 15:31:25] ERROR[3785] chan_dahdi.c: Chan 32 - Protocol error. Reason = Seize Timeout, R2 State = Seize Transmitted, MF state = MF Engine Off, MF Group = Forward MF init, CAS = 0x08
    DNIS = 2236100, ANI = 1600, MF = 0x20
    [Oct 29 15:31:25] DEBUG[3785] chan_dahdi.c: Chan 32 - CAS Tx >> [IDLE] 0x08
    [Oct 29 15:31:25] DEBUG[3785] chan_dahdi.c: Chan 32 - CAS Raw Tx >> 0x09
    [Oct 29 15:31:25] ERROR[3785] chan_dahdi.c: MFC/R2 protocol error on chan 32: Seize Timeout
    [Oct 29 15:31:25] VERBOSE[3785] logger.c: -- Hungup 'DAHDI/32-1'
    [Oct 29 15:31:25] VERBOSE[3785] logger.c: == Everyone is busy/congested at this time (1:0/0/1)
    [Oct 29 15:31:25] DEBUG[3610] chan_dahdi.c: Chan 37 - Bits changed from 0x0C to 0x08
    [Oct 29 15:31:25] DEBUG[3610] chan_dahdi.c: Chan 37 - CAS Rx << [IDLE] 0x08
    [Oct 29 15:31:25] NOTICE[3610] chan_dahdi.c: Far end unblocked on chan 37
    [Oct 29 15:31:26] DEBUG[3785] chan_dahdi.c: Sent deferred digit string: T2236100w
    [Oct 29 15:31:28] VERBOSE[3785] logger.c: -- DAHDI/141-1 answered SIP/1600-00000002
    [Oct 29 15:31:28] DEBUG[3785] chan_dahdi.c: Requested indication 20 on channel DAHDI/141-1

    Muchas Gracias,
    Ing. Diego Olivera
     
  2. Luis Diego

    Joined:
    Nov 1, 2010
    Messages:
    237
    Likes Received:
    0
    Aún este tema quedo en cabo suelto no se que es lo que era pero la empresa Maxcom me cambio el E1 y funciono al parecer era problema de ellos.
    Gracias
     

Share This Page