Elastix Incoming/Outgoing HOWTO

Discussion in 'General' started by sheikhatif, Jan 28, 2011.

  1. sheikhatif

    Joined:
    Jan 25, 2011
    Messages:
    1
    Likes Received:
    0
    Hi All,

    I have 2 Quadro's 16x and 2x and both of them are connected as SIP_Tunnel and incoming/outgoing is working fine, now I want to configure Elastix for incoming and outgoing communication with both of them.

    My senario is something like that

    (Main Office) Quadro 16x -----> SIP_TUNNEL----->(Site_office) Quadro 2x------> Elastix

    Using Elastix I can send and receives calls from site office quadro 2x but can't make or receives calls from Main Office.

    when I dial number of Main Office Quadro suppose (703) elastix automatically remove 7 after this got this error

    "Got SIP response 302 "Moved Temporarily" back from 10.60.3.50"

    Can any one send me the step by step guide to achieve this ..



    any help will be appreciated ...


    regards,
     
  2. fmvillares

    Joined:
    Sep 8, 2007
    Messages:
    1,785
    Likes Received:
    0
    Elastix without tears is a very good how to to learn Elastix and use of the freepbx Front end

    Good Luck!!!
     

Share This Page