Elastix-2.0 SPA3102 Problem

Discussion in 'General' started by eski, Aug 10, 2010.

  1. eski

    Joined:
    Sep 11, 2008
    Messages:
    28
    Likes Received:
    0
    I had Elastix 1.6 with SPA3102 PSTN Trunk for 2 years without problems
    Yesterday installed new Elastix 2.0 with same settings (copy-paste) but the PSTN trunk not working :)
    Bellow is my trunk config

    Tunk Name: GSM
    Outbound Caller ID: 69XXXXXXXX
    Trunk Name: GSM

    Peer Details:
    disallow=all
    allow=ulaw,gsm
    canreinvite=no
    context=from-trunk
    host=192.168.x.xx
    nat=never
    port=5062
    qualify=yes
    type=friend
    secret=xxxxxx
    username=GSM
    dtmfmode=info


    I have blank User Details but played without problems for 2 years now
    Nothing changes in SPA3102 but when trying with old Elastix 1.6 everything working fine!!
    (all settings, Network ip_address, conf files etc are same for both)

    What change in Elastix 2.0???

    Greetings from Athens Greece
     
  2. danardf

    Joined:
    Dec 3, 2007
    Messages:
    8,069
    Likes Received:
    12
    It seems that there's some problems with the port SIP.
    The trunk config port is still in 5060 and not 5062 in your case.

    Maybe it's an Asterisk bug.
    You could swap the FXO port with your FXS port for the moment.

    Maybe it exist another way, but I don't know. No idea.

    Try this.

    Regards
     

Share This Page