Elastix 2.0 RC1 falling down

Discussion in 'General' started by arrow1, Nov 24, 2010.

  1. arrow1

    Joined:
    Nov 21, 2010
    Messages:
    89
    Likes Received:
    0
    I have noticed fallowing errors: on fresh installation

    ERROR[3922] chan_sip.c: Serious Network Trouble; __sip_xmit returns error for pkt data

    ERROR[3922] app_cbmysql.c: Failed to connect to mysql database meetme on localhost.

    ERROR[3951] chan_woomera.c: cannot connect to {default} localhost/42420

    ERROR[3922] res_config_ldap.c: No directory URL or host found.

    ERROR[3922] res_config_pgsql.c: PostgreSQL RealTime: Failed to connect database asterisk on 127.0.0.1:

    ERROR[3909] astobj2.c: bad magic number 0x0 for 0x97276c8

    ERROR[3909] res_config_ldap.c: No directory URL or host found.

    WARNING[3800] chan_dahdi.c: CallerID returned with error on channel 'DAHDI/1-1'

    ERROR[3800] callerid.c: No start bit found in fsk data.

    ERROR[3700] res_config_ldap.c: No directory URL or host found.

    On the Elastix 2.0 RC1 ......

    Code:
    elastix*CLI> dahdi show channels
       Chan Extension  Context         Language   MOH Interpret        Blocked    St                                                                                                 ate
     pseudo            default                    default                         In                                                                                                  Service
          1            from-zaptel                default                         In                                                                                                  Service
          2            from-zaptel                default                         In                                                                                                  Service
          3            from-zaptel                default                         In                                                                                                  Service
          4            from-zaptel                default                         In                                                                                                  Service
          5            from-zaptel                default                         In                                                                                                  Service
          6            from-zaptel                default                         In                                                                                                  Service
          7            from-zaptel                default                         In                                                                                                  Service
          8            from-zaptel                default                         In                                                                                                  Service
    elastix*CLI> dahdi show channel 1
    Channel: 1
    File Descriptor: 13
    Span: 1
    Extension:
    Dialing: no
    Context: from-zaptel
    Caller ID:
    Calling TON: 0
    Caller ID name:
    Mailbox: none
    Destroy: 0
    InAlarm: 0
    Signalling Type: FXS Kewlstart
    Radio: 0
    Owner: <None>
    Real: <None>
    Callwait: <None>
    Threeway: <None>
    Confno: -1
    Propagated Conference: -1
    Real in conference: 0
    DSP: no
    Busy Detection: no
    TDD: no
    Relax DTMF: no
    Dialing/CallwaitCAS: 0/0
    Default law: ulaw
    Fax Handled: no
    Pulse phone: no
    DND: no
    Echo Cancellation:
            128 taps
            (unless TDM bridged) currently OFF
    Wait for dialtone: 0ms
    Actual Confinfo: Num/0, Mode/0x0000
    Actual Confmute: No
    Hookstate (FXS only): Offhook
    
    So far analog lines works ok, ony MOH sometimes stucks somewhere.....

    Please advice for a new Elastix users.

    Regards, John
     

Share This Page