Elastix 2.0 and Extension IAX2 => can´t register

alez

Joined
Feb 9, 2009
Messages
3
Likes
0
Points
0
#1
People on the forum, here is a collaborative small dishes of mine:

If you are going to use Elastix 2.0, when adding an extension of type IAX2, are likely to have the problem that can not be registered.
The problem is that the parameter "requirecalltoken" by default has no value, and that the extension can be registered must be set to "no."

Regards
Alejandro Zanetti
 

Hammad

Joined
May 19, 2009
Messages
9
Likes
0
Points
0
#2
use calltokenoptional-0.0.0.0 in advanced iax settings (from FreePBX) or in /etc/asterisk/iax_general_custom.conf
 

syedwasi

Joined
Sep 6, 2010
Messages
4
Likes
0
Points
0
#3
after making chnages still it does not work ..

following error message

ERRORS

Settings in /etc/asterisk/iax_general_custom.conf may override these. Those settings should be removed.

pls advise further soln..

regds
Wasi
 

Hammad

Joined
May 19, 2009
Messages
9
Likes
0
Points
0
#4
syedwasi,

it seems that u r using Advance IAX setting module in FreePBX. To use this module correctly, u should first delete any line in /etc/asterisk/iax_general_custom.conf
Open SSH shell command and use nano or vi and delete all the entries in that file.

now, If you open Advance IAX setting module in FreePBX, you should not receive that error message "Settings in /etc/asterisk/iax_general_custom.conf may override these. Those settings should be removed."

then, go to the end of the Advance IAX setting module in FreePBX and add in "Other IAX Settings" calltokenoptional = 0.0.0.0
 

edmart777

Joined
Oct 21, 2011
Messages
24
Likes
0
Points
0
#5
Re: Re:Elastix 2.0 and Extension IAX2 => can´t register

Excellent good work


From Bogota - Colombia
 

Members online

No members online now.

Latest posts

Forum statistics

Threads
30,901
Messages
130,885
Members
17,562
Latest member
colak
Top