Elastix 2.0.3 Openvox a1200p

Discussion in 'Gateways' started by security, Jan 11, 2011.

  1. security

    Joined:
    May 14, 2007
    Messages:
    299
    Likes Received:
    0
    Tengo instalado elastix 2.0.3, con la tarjeta openvox a1200p, pero no me reconoce el tono de colgado, si llamo desde un telefono de afuera (de la calle), y este cuelga, y sino se cuelga en la exten, no cuelga de una vez, se queda la linea ocupada. Este es el archivo de configuracion despues de leer varios foros.

    system.conf

    # Span 1: OPVXA1200/12 "OpenVox A1200P/A800P Board 13" (MASTER)
    fxsks=1
    fxsks=2
    fxsks=3
    fxsks=4
    fxsks=5
    fxsks=6
    fxsks=7
    fxsks=8
    fxsks=9
    fxsks=10
    fxsks=11
    fxsks=12
    echocanceller=mg2,1-12

    # Global data

    loadzone = us
    defaultzone = us

    chan_dahdi.conf


    [channels]
    language=es
    context=from-pstn
    signalling=fxs_ks
    rxwink=300 ; Atlas seems to use long (250ms) winks
    usecallerid=yes
    hidecallerid=no
    callwaiting=yes
    usecallingpres=yes
    callwaitingcallerid=yes
    threewaycalling=yes
    transfer=yes
    canpark=yes
    cancallforward=yes
    callreturn=yes
    echocancel=yes
    echocancelwhenbridged=no
    faxdetect=incoming
    echotraining=800
    rxgain=0.0
    txgain=0.0
    callgroup=1
    pickupgroup=1

    ;Uncomment these lines if you have problems with the disconection of your analog lines
    busydetect=yes
    busycount=3


    fxs_immediate=no

    dtmfmode=rfc2833
    dtmfmode=inband
    dtmfmode=info
    relaxdtmf=yes
    rfccompensate=yes
    answerpolarity=yes


    immediate=no




    dahdi-channels.conf



    ; Span 1: OPVXA1200/12 "OpenVox A1200P/A800P Board 13" (MASTER)
    ;;; line="1 OPVXA1200/12/0 FXSKS"
    signalling=fxs_ks
    callerid=asreceived
    group=0
    context=from-pstn
    channel => 1
    callerid=
    group=
    context=default

    ;;; line="2 OPVXA1200/12/1 FXSKS"
    signalling=fxs_ks
    callerid=asreceived
    group=0
    context=from-pstn
    channel => 2
    callerid=
    group=
    context=default

    ;;; line="3 OPVXA1200/12/2 FXSKS"
    signalling=fxs_ks
    callerid=asreceived
    group=0
    context=from-pstn
    channel => 3
    callerid=
    group=
    context=default


    si alguien me echa una mano...le agradezco
    :blink: :) :p :p :p
     
  2. lisa.gao

    Joined:
    Jul 1, 2010
    Messages:
    39
    Likes Received:
    0
    Hi,
    Sorry, I'm not very clear what's your problem? Please paste the complete log when you make a call. If possible,please give us ssh to check. My Email: lisa.gao@openvox.cn
     

Share This Page