elastix-1.6 stable and DAHDI - OPENVOX A400P issu

dhaval.it01034@gmail.com

Joined
Oct 26, 2009
Messages
2
Likes
0
Points
0
#1
Hi All,

I have following setup in my production environment,

i have installed elastix distro. 1.6 with openvox A400P card with 4 fxo ports.

lines are configured properly and incoming/outgoing works also fine from last 1 month.

1 issue i am facing is regarding callerid . as incoming calls come to any line it didnt detect a caller id . of that caller how this happens i tried a lot . also ask openvox team for regarding this , they gave me idea regarding upgrading a dahdi-linux ,

how can i achive this following are my setup on server.
==============================================================================
//chan_dahdi.conf

[trunkgroups]

[channels]
;;context=from-pstn
context=from-zaptel
loadzone=in
defaultzone=in
signalling=fxs_ks
rxwink=300 ; Atlas seems to use long (250ms) winks
callerid=asreceived
usecallerid=yes
;cidsignalling=bell
cidstart=ring
hidecallerid=no
callwaiting=yes
usecallingpres=yes
callwaitingcallerid=yes
threewaycalling=yes
transfer=yes
canpark=yes
cancallforward=yes
callreturn=yes
echocancel=yes
echocancelwhenbridged=yes
faxdetect=both
echotraining=800
rxgain=0.0
txgain=0.0
callgroup=1
pickupgroup=1
relaxdtmf=yes
adsi=yes
sendcalleridafter=2 ;you may need to add this switch
hanguponpolarityswitch = yes (may have to ask your telco for the polarity reversal)

;Uncomment these lines if you have problems with the disconection of your analog lines
busydetect=yes
busycount=3
immediate=no


#include dahdi-channels.conf

=======================================================================================
; Autogenerated by /usr/sbin/dahdi_genconf on Sun Jan 31 11:40:25 2010
; If you edit this file and execute /usr/sbin/dahdi_genconf again,
; your manual changes will be LOST.
; Dahdi Channels Configurations (chan_dahdi.conf)
;
; This is not intended to be a complete chan_dahdi.conf. Rather, it is intended
; to be #include-d by /etc/chan_dahdi.conf that will include the global settings
;

; Span 1: WCTDM/4 "Wildcard TDM400P REV E/F Board 5" (MASTER)
;;; line="1 WCTDM/4/0 FXSKS (In use)"
signalling=fxs_ks
callerid=asreceived
group=0
context=from-zaptel
channel => 1
callerid=
group=
context=default

;;; line="2 WCTDM/4/1 FXSKS (In use)"
signalling=fxs_ks
callerid=asreceived
group=0
context=from-zaptel
channel => 2
callerid=
group=
context=default

;;; line="3 WCTDM/4/2 FXSKS (In use)"
signalling=fxs_ks
callerid=asreceived
group=0
context=from-zaptel
channel => 3
callerid=
group=
context=default


;;; line="4 WCTDM/4/3 FXSKS (In use)"
signalling=fxs_ks
callerid=asreceived
group=1
context=from-zaptel
channel => 4
callerid=
group=
context=default

==============================================================================================
also changed all mode to INDIA in indication.conf.

i am using service of bharti(AIRTEL) and BSNL provider.

please help me or suggest me regarding this .

thanks in advace.

regards
Dhaval
 

Croc

Joined
Jan 29, 2009
Messages
19
Likes
0
Points
0
#2
loadzone=in
defaultzone=in

as far i know this doesn't belong in chan_dahdi.conf

remove and replace with
language=in

put landzone and defaultzone in to /etc/dahdi/system.conf this is where they belong

also make sure you edit /etc/modprobe.conf and add options wctdm opermode=INDIA

from what i see you went over elastix without tears but didn't pay attention 100%
all of this is explained in that great pdf
 

dhaval.it01034@gmail.com

Joined
Oct 26, 2009
Messages
2
Likes
0
Points
0
#3
thanks for quick reply,

i changed and checked ,

i am still facing same issue .

even they didnt show DID and callerid number in dialplan


anybody have some idea.

regards
Dhaval
 

Members online

No members online now.

Latest posts

Forum statistics

Threads
30,902
Messages
130,887
Members
17,565
Latest member
omarmenichetti
Top