Elastix 1.6+B100P+TE => no outgoing calls [Solved]

Discussion in 'General' started by raebyrn, Jul 27, 2010.

  1. raebyrn

    Joined:
    Jul 27, 2010
    Messages:
    3
    Likes Received:
    0
    Hi all,

    I can receive external calls, but always get the "all circuits are busy now" announcement when trying to call an outside number. If tried following the OpenVox Elastix guide to the letter. The hardware detection in Elastix has always given me this result:

    Port 1: TE-mode BRI S/T interface line (for phone lines)
    -> Protocol: DSS1 (Euro ISDN)
    -> Layer 4 protocol 0x04000001 is detected, but not allowed for TE lib.
    -> childcnt: 2
    * Port NOT useable for PBX (maybe there is already a PBX running?)
    --------

    *CLI> misdn show channels
    Channel List: (nil)

    Is this the problem?

    What .conf files should I attach?

    Thanks and best regards,

    Rae
     
  2. raebyrn

    Joined:
    Jul 27, 2010
    Messages:
    3
    Likes Received:
    0
    Re:Elastix 1.6 + B100P + TE => no outgoing calls

    here's the log of such a call attempt

    -- Goto (macro-dialout-trunk,s,21)
    -- Executing [s@macro-dialout-trunk:21] Set("SIP/1076-00000001", "pre_num=AMP:mISDN /g:isdn/") in new stack
    -- Executing [s@macro-dialout-trunk:22] Set("SIP/1076-00000001", "the_num=OUTNUM") in new stack
    -- Executing [s@macro-dialout-trunk:23] Set("SIP/1076-00000001", "post_num=") in new stack
    -- Executing [s@macro-dialout-trunk:24] GotoIf("SIP/1076-00000001", "1?outnum:skipoutnum") in new stack
    -- Goto (macro-dialout-trunk,s,25)
    -- Executing [s@macro-dialout-trunk:25] Set("SIP/1076-00000001", "the_num=01753036831") in new stack
    -- Executing [s@macro-dialout-trunk:26] Dial("SIP/1076-00000001", "mISDN /g:isdn/01753036831|300|") in new stack
    == Everyone is busy/congested at this time (1:0/0/1)
    -- Executing [s@macro-dialout-trunk:27] Goto("SIP/1076-00000001", "s-CHANUNAVAIL|1") in new stack
    -- Goto (macro-dialout-trunk,s-CHANUNAVAIL,1)
    -- Executing [s-CHANUNAVAIL@macro-dialout-trunk:1] GotoIf("SIP/1076-00000001", "1?noreport") in new stack
    -- Goto (macro-dialout-trunk,s-CHANUNAVAIL,3)
    -- Executing [s-CHANUNAVAIL@macro-dialout-trunk:3] NoOp("SIP/1076-00000001", "TRUNK Dial failed due to CHANUNAVAIL (hangupcause: 66) - failing through to other trunks") in new stack
    -- Executing [01753036831@from-internal:5] Macro("SIP/1076-00000001", "outisbusy|") in new stack
    -- Executing [s@macro-outisbusy:1] Playback("SIP/1076-00000001", "all-circuits-busy-now|noanswer") in new stack
    -- <SIP/1076-00000001> Playing 'all-circuits-busy-now' (language 'en')
    -- Executing [s@macro-outisbusy:2] Playback("SIP/1076-00000001", "pls-try-call-later|noanswer") in new stack
    -- <SIP/1076-00000001> Playing 'pls-try-call-later' (language 'en')
    == Spawn extension (macro-outisbusy, s, 2) exited non-zero on 'SIP/1076-00000001' in macro 'outisbusy'
    == Spawn extension (from-internal, 01753036831, 5) exited non-zero on 'SIP/1076-00000001'
    -- Executing [h@from-internal:1] Macro("SIP/1076-00000001", "hangupcall") in new stack
    -- Executing [s@macro-hangupcall:1] GotoIf("SIP/1076-00000001", "1?skiprg") in new stack
    -- Goto (macro-hangupcall,s,4)
    -- Executing [s@macro-hangupcall:4] GotoIf("SIP/1076-00000001", "1?skipblkvm") in new stack
    -- Goto (macro-hangupcall,s,7)
    -- Executing [s@macro-hangupcall:7] GotoIf("SIP/1076-00000001", "1?theend") in new stack
    -- Goto (macro-hangupcall,s,9)
    -- Executing [s@macro-hangupcall:9] Hangup("SIP/1076-00000001", "") in new stack
    == Spawn extension (macro-hangupcall, s, 9) exited non-zero on 'SIP/1076-00000001' in macro 'hangupcall'
    == Spawn extension (from-internal, h, 1) exited non-zero on 'SIP/1076-00000001'
     
  3. raebyrn

    Joined:
    Jul 27, 2010
    Messages:
    3
    Likes Received:
    0
    Re:Elastix 1.6 + B100P + TE => no outgoing calls

    Solved.

    One litte space too much in the trunk...

    changed "mISDN /g:isdn/$OUTNUM$" to "mISDN/g:isdn/$OUTNUM$"

    Now it works.
     

Share This Page