Elastix 1.5 not detecting Rhino R8FXX

Discussion in 'Gateways' started by farhansabir, Mar 31, 2009.

  1. farhansabir

    Joined:
    Apr 11, 2008
    Messages:
    19
    Likes Received:
    0
    Previously I had Elastix 1.3-2 which auto detected Rhino RCB8FXX with 4 FXO. Now i installed Elastix 1.5. Under Hardware Detection, i see the card as "Span # 1: Rhino RCB8FXX/1 "Rhino RCB8FXX/1" (MASTER)" but all ports grayed out.

    /proc/dahdi/1 shows:
    Span 1: Rhino RCB8FXX/1 "Rhino RCB8FXX/1" (MASTER)

    1 FXO/1/0 FXSKS (In use) (EC: OSLEC)
    2 FXO/1/1 FXSKS (In use) (EC: OSLEC)
    3 FXO/1/2 FXSKS (In use) (EC: OSLEC)
    4 FXO/1/3 FXSKS (In use) (EC: OSLEC)
    5 ---/1/4
    6 ---/1/5
    7 ---/1/6
    8 ---/1/7

    However, /etc/asterisk/dahdi-channels.conf was blank. So i edited the file and added the following from another Elastix 1.3-2 system with OpenVox:

    signalling=fxs_ks
    callerid=asreceived
    group=0
    context=from-dahdi
    channel => 1
    context=default

    signalling=fxs_ks
    callerid=asreceived
    group=0
    context=from-dahdi
    channel => 2
    context=default

    signalling=fxs_ks
    callerid=asreceived
    group=0
    context=from-dahdi
    channel => 3

    signalling=fxs_ks
    callerid=asreceived
    group=0
    context=from-dahdi
    channel => 4
    context=default

    I replaced from-zaptel to from-dahdi - not sure how it should be.
    When i restarted amportal, everything seems to working fine, except:

    1. I can see the four channels as "In Use" (no lines attached)
    2. What should be the context with dahdi => from-dahdi, from-zaptel or from-pstn?

    Hope this post helps someone and someone can help me :)

    Regards
    Farhan

    [​IMG]
     

Share This Page