Elastix 1.5.2 + TDM 2400 + B410P

Discussion in 'Gateways' started by khagelay, May 19, 2009.

  1. khagelay

    Joined:
    Oct 30, 2008
    Messages:
    8
    Likes Received:
    0
    Dear Forum,

    Hope to find help here.
    Having problems with new Elastix 1.5.2.
    To make it short cannot configure B410P accordingly. Lights are keeping red blinking.
    Using Dahdi and not mISDN any more. Configured following files
    /ets/dahdi/system.conf (only one span seen here)

    # Span 2: B4/0/1 "B4XXP (PCI) Card 0 Span 1" AMI/CCS RED
    span=2,1,0,ccs,ami
    # termtype: te
    bchan=25-26
    hardhdlc=27
    echocanceller=oslec,25-26


    loadzone = at
    defaultzone = at



    /etc/asterisk/dahdi-channels.conf (only one span here)

    ; Span 2: B4/0/1 "B4XXP (PCI) Card 0 Span 1" AMI/CCS RED
    group=0,12
    context=from-pstn
    switchtype = euroisdn
    signalling = bri_cpe
    channel => 25-26
    context = default
    group = 63


    Two channels are in TE-mode two in NT-mode (all point to point)

    Driver is loaded; dmesg shows my cards; dahdi_tools gives red alarm fpr B410P; TDM 2400 running fine; system is updated /Athlon 64)

    Is there something missing in my configuration? Or what can I do?

    Thanks a lot
    greetings from the Alps
     

Share This Page