Elastix 0.9.2 mISDN PickUp

Discussion in 'General' started by marlo, Apr 3, 2008.

  1. marlo

    Joined:
    Apr 2, 2008
    Messages:
    9
    Likes Received:
    0
    Congratulations to Elastix. I have installed Elastix 0.9.2 on a Via EPIA Board 1000Mhz, 4GB industry Flash Modul (8000.000 Write Cycles), 1024MB RAM and 2xHFC-S USB ISDN Adapters (NT-Mode) with mISDN - This worked perfect for me on 2 ISDN base connectors (t-com). My problem is the call pickup feature: In the Extension menu i have only insert in both fields the Numder 1 (CallGroup and PickupGroup) - I have defined the incomming number 123456 => Destination Extension 200. When the Extension 200 is ringing i have tried to PickUp the call (from Extension 201) width '**200' or '*8200' - without success.
    Must i change any file? Can someone tell me about this thread? http://www.elastix.org/index.php?option=com_joomlaboard&Itemid=34&func=view&id=5470&catid=3#5470 especially this section:
    Thanks from Germany<br><br>Post edited by: marlo, at: 2008/04/03 04:18
     
  2. JoseVelasco

    Joined:
    Feb 25, 2008
    Messages:
    111
    Likes Received:
    0
    Marlo, have you solved this problem? I have the same question that you, I am seeking but I don't find anything easyly explained...

    Thanks.
     
  3. JoseVelasco

    Joined:
    Feb 25, 2008
    Messages:
    111
    Likes Received:
    0
    Marlo, have you solved this problem? I have the same question that you, I am seeking but I don't find anything easyly explained...

    Thanks.
     
  4. marlo

    Joined:
    Apr 2, 2008
    Messages:
    9
    Likes Received:
    0
    Hi JoseVelasco, No i´havent solved this problem! I think PickUp is only functional with queues or ringgroups... Thanks.
     

Share This Page