Elastix 0.8.4-Beta2 problem!

Discussion in 'General' started by hetii, Jun 29, 2007.

  1. hetii

    Joined:
    Jun 7, 2007
    Messages:
    32
    Likes Received:
    0
    HI.

    I have few problem with this version:( Ofcourse in 8.3 its work.

    First i cannot heare voice with two side. I call sip to
    sip and only one of them can recive voice, so i change in bouth NAT=no and apply change.

    So i again make call and sems its work.

    And now i have again short question because when i apply change GUI print me "This DID is already associatedwith extension :101(test2)" and i see he don`t apply NAT change but i heare voice with both side, why ?.

    Then i check

    next i call from pstn to SIP and again i heare only one side. I don`t now why i heare voice only in handy. Softphone is queied.

    So i make new sip extension, then edit again and change nat=no and change DID nummber. Then i apply and i see he realy apply my changes.

    So i again make call from pstn and i still heare only one side.

    BTW. For what is this alert ? "This DID is already associatedwith extension" ?

    Also i have problem with reciving faxes from pstn in my virtual fax. It will work fine in 8.3 version.

    P.S.
    I use Sangoma card E1 A101x<br><br>Post edited by: hetii, at: 2007/06/29 15:16
     
  2. lek

    lek Guest

    Thanks for the post hetii,

    We could not reproduce this bug about the voice being heard in only one side. Could you tell me a little bit more about your scenario? The IP of your phone is in the same network?
     
  3. hetii

    Joined:
    Jun 7, 2007
    Messages:
    32
    Likes Received:
    0
    Hi

    I find my problem with one side voice communication.

    When i change in zapata.conf switchtype=euroisdn (before it was national) and i reboot machines i can here voice in both side. I don`t now why in elastix 8.3 when i was set national i can make proper call from/to my pstn.

    In this same time i send ticket to my PSTN provider (Because i cannot make international calls) so i think he make some change on his PBX.

    BTW now i download latest 8.4 stable version so when i install them i check this settings again.

    Regards.
     
  4. hetii

    Joined:
    Jun 7, 2007
    Messages:
    32
    Likes Received:
    0
    Hi

    I just again test elastix.

    Unfortunately i still don`t here voice from my pc microfon to my handy,When i call thought PSTN E1 line. From my handy to PC headset i here voice properly. When i use only Soft phone all works fine.

    And second think i cannot make international calls. I call many time to my PSTN provider and he says i must select somewhere this option "Numbering Type" or "nature number for channel B" to Unknown. I don`t now where i can set this option.
    -----------
    New info.
    I find this option in zapata.conf
    pridialplan=unknown

    ------Fresh info :)

    No i now how can i make calls. But when i add pridialplan=unknown to zapata.conf i here voice only one side.

    Any sugestion ?



    Regards.<br><br>Post edited by: hetii, at: 2007/07/03 11:41
     

Share This Page