E1 MFCR2 Problem (version 9.0)

Discussion in 'General' started by py8azt, Nov 21, 2007.

  1. py8azt

    Joined:
    Oct 19, 2007
    Messages:
    8
    Likes Received:
    0
    I installed Elastix with a Digium TE205p. One Span#1 goes to Telco, Span #2 goes to PBX legacy.

    zapata.conf
    Code:
    span=1,1,1,cas,hdb3
    cas=1-15:1101
    cas=17-31:1101
    span=2,2,2,cas,hdb3
    cas=32-46:1101
    cas=48-62:1101
    loadzone=us
    defaultzone=us
    unicall.conf
    Code:
    group=1
    protocolclass = mfcr2
    protocolvariant = br,20,4,8
    overlapdial=yes
    protocolend=cpe
    context=from-pstn
    channel => 1-15,17-31
    group=2
    protocolclass = mfcr2
    protocolvariant=br,20,20
    overlapdial=yes
    protocolend=co
    context=from-internal
    channel => 32-46,48-62
    When I try make a call on PBX legacy got this:
    Astesik DEBUG:
    Code:
    [Nov 20 16:15:11] DEBUG[11986] chan_unicall.c: unicall_call called - 'g2/7733'
    [Nov 20 16:15:11] DEBUG[11986] chan_unicall.c: unicall_call caller id - '1010'
    [Nov 20 16:15:11] NOTICE[11986] chan_unicall.c: Unicall/38 event Dialing
    [Nov 20 16:15:11] NOTICE[11986] chan_unicall.c: Exception on 54, channel 38
    [Nov 20 16:15:16] NOTICE[11986] chan_unicall.c: Unicall/38 event Protocol failure
    [Nov 20 16:15:16] ERROR[11986] chan_unicall.c: Unicall/38 protocol error. Cause 32769
    [Nov 20 16:15:16] DEBUG[11986] chan_unicall.c: disabled echo cancellation on channel 38
    [Nov 20 16:15:16] DEBUG[11986] chan_unicall.c: Hangup: channel: 38 index = 0, normal = 54, callwait = -1, thirdcall = -1
    [Nov 20 16:15:16] DEBUG[11986] chan_unicall.c: Updated conferencing on 38, with 0 conference users
    Any help?
    (I started this subject on the wrong forum, so I restarted here)

    Luc
     

Share This Page