Dual AEX800 Cards

Discussion in 'Gateways' started by aclauson, Apr 23, 2010.

  1. aclauson

    Joined:
    Feb 24, 2010
    Messages:
    1
    Likes Received:
    0
    I have a system with two AEX800 cards, one has 8 analog lines connected, and the other has two. My problem is that I can only get 8 to work simultaneously. After running auto-detect, it generates the following DADHI file. It appears that everything is grouped into one trunk, g0, and I set up my outbound route to reflect one trunk with a max of 16 channels. However, after using up 8 lines, it doesn't spill over in the next card. Could anyone help me out on this? I've considered manually changing the file to put the other card into its own trunk group. I'm a little confused as to why the dahdi_genconf inserted two group entries for each channel as well.

    Thank you!

    Code:
    ; Autogenerated by /usr/sbin/dahdi_genconf on Fri Apr 23 17:32:58 2010
    ; If you edit this file and execute /usr/sbin/dahdi_genconf again,
    ; your manual changes will be LOST.
    ; Dahdi Channels Configurations (chan_dahdi.conf)
    ;
    ; This is not intended to be a complete chan_dahdi.conf. Rather, it is intended
    ; to be #include-d by /etc/chan_dahdi.conf that will include the global settings
    ;
    
    ; Span 1: WCTDM/0 "Wildcard AEX800 Board 1" (MASTER) 
    ;;; line="1 WCTDM/0/0 FXSKS"
    signalling=fxs_ks
    callerid=asreceived
    group=0
    context=from-pstn
    channel => 1
    callerid=
    group=
    context=default
    
    ;;; line="2 WCTDM/0/1 FXSKS"
    signalling=fxs_ks
    callerid=asreceived
    group=0
    context=from-pstn
    channel => 2
    callerid=
    group=
    context=default
    
    ;;; line="3 WCTDM/0/2 FXSKS"
    signalling=fxs_ks
    callerid=asreceived
    group=0
    context=from-pstn
    channel => 3
    callerid=
    group=
    context=default
    
    ;;; line="4 WCTDM/0/3 FXSKS"
    signalling=fxs_ks
    callerid=asreceived
    group=0
    context=from-pstn
    channel => 4
    callerid=
    group=
    context=default
    
    ;;; line="5 WCTDM/0/4 FXSKS"
    signalling=fxs_ks
    callerid=asreceived
    group=0
    context=from-pstn
    channel => 5
    callerid=
    group=
    context=default
    
    ;;; line="6 WCTDM/0/5 FXSKS"
    signalling=fxs_ks
    callerid=asreceived
    group=0
    context=from-pstn
    channel => 6
    callerid=
    group=
    context=default
    
    ;;; line="7 WCTDM/0/6 FXSKS"
    signalling=fxs_ks
    callerid=asreceived
    group=0
    context=from-pstn
    channel => 7
    callerid=
    group=
    context=default
    
    ;;; line="8 WCTDM/0/7 FXSKS"
    signalling=fxs_ks
    callerid=asreceived
    group=0
    context=from-pstn
    channel => 8
    callerid=
    group=
    context=default
    
    
    ; Span 2: WCTDM/1 "Wildcard AEX800 Board 2" 
    ;;; line="9 WCTDM/1/0 FXSKS"
    signalling=fxs_ks
    callerid=asreceived
    group=0
    context=from-pstn
    channel => 9
    callerid=
    group=
    context=default
    
    ;;; line="10 WCTDM/1/1 FXSKS"
    signalling=fxs_ks
    callerid=asreceived
    group=0
    context=from-pstn
    channel => 10
    callerid=
    group=
    context=default
    
    ;;; line="11 WCTDM/1/2 FXSKS"
    signalling=fxs_ks
    callerid=asreceived
    group=0
    context=from-pstn
    channel => 11
    callerid=
    group=
    context=default
    
    ;;; line="12 WCTDM/1/3 FXSKS"
    signalling=fxs_ks
    callerid=asreceived
    group=0
    context=from-pstn
    channel => 12
    callerid=
    group=
    context=default
    
    ;;; line="13 WCTDM/1/4 FXSKS"
    signalling=fxs_ks
    callerid=asreceived
    group=0
    context=from-pstn
    channel => 13
    callerid=
    group=
    context=default
    
    ;;; line="14 WCTDM/1/5 FXSKS"
    signalling=fxs_ks
    callerid=asreceived
    group=0
    context=from-pstn
    channel => 14
    callerid=
    group=
    context=default
    
    ;;; line="15 WCTDM/1/6 FXSKS"
    signalling=fxs_ks
    callerid=asreceived
    group=0
    context=from-pstn
    channel => 15
    callerid=
    group=
    context=default
    
    ;;; line="16 WCTDM/1/7 FXSKS"
    signalling=fxs_ks
    callerid=asreceived
    group=0
    context=from-pstn
    channel => 16
    callerid=
    group=
    context=default
    
     

Share This Page