DLINK PSTN Gateway DVG-3104MS

Discussion in 'IP Phones' started by osagendn, Feb 6, 2010.

  1. osagendn

    Joined:
    Feb 6, 2010
    Messages:
    2
    Likes Received:
    0
    I have two Microsoft Response Point Systems and with that I have two DVG-3104MS. I wanted to know if anyone knew if I could get this to work with the Elastix system. It has a web interface. I just don't know where to start.

    Thanks for you assistance.

    Regards,
    Neadom
     
  2. danardf

    Joined:
    Dec 3, 2007
    Messages:
    8,069
    Likes Received:
    12
    Hi. And welcome to our Elastix Forum.

    I think that; if the MOCS works on the SIP-TCP, it's no with Elastix 1.6 (Asterisk 1.4), else if your phone works with the SIP-UDP, then yes.
    Otherwise, maybe waiting Elasrix 2.0 (with Asterisk 1.6), and there, you could use the SIP-TCP.

    For the gateway DVG-3104MS, I don't know.

    In any case, you must be careful with the codecs and the SIP-UDP/TCP!
    Microsoft could use some own codec!

    If any device can use SIP on UDP and the G711 (alaw, ulaw), I think that there's no problem, but....:huh:

    Regards
     

Share This Page