Digium B410P + Elastix 1.5 Stable 32Bit

Discussion in 'Gateways' started by D3vilSOul, Mar 26, 2009.

  1. D3vilSOul

    Joined:
    Mar 26, 2009
    Messages:
    1
    Likes Received:
    0
    Hello,

    I have a B410P card with the new elastix 1.5 stable, and I can't get the the card to work,
    I'm from Portugal, and the card is connected, the ports that are connected to the ISDN outside
    line are steady GREEN an the others that are disconnected, are blinking RED, as far as I
    know that is normal, in the Hardware detection the card is detected and shows as follow:

    Span # 1: B4/0/1 "B4XXP (PCI) Card 0 Span 1" (MASTER) AMI/CCS
    1
    Not in Use

    2
    Not in Use

    3
    Not in Use
    Span # 2: B4/0/2 "B4XXP (PCI) Card 0 Span 2" AMI/CCS RED
    4
    Not in Use

    5
    Not in Use

    6
    Not in Use
    Span # 3: B4/0/3 "B4XXP (PCI) Card 0 Span 3" AMI/CCS RED
    7
    Not in Use

    8
    Not in Use

    9
    Not in Use
    Span # 4: B4/0/4 "B4XXP (PCI) Card 0 Span 4" AMI/CCS
    10
    Not in Use

    11
    Not in Use

    12
    Not in Use

    I have the default Zap TRUNK that comes with elastix, and when I try to make a call
    it shows:

    ---------------------------------------------------------------------------------------

    Executing [s@macro-outbound-callerid:11] MacroExit("SIP/1001-085d74b0", "") in new stack
    -- Executing [s@macro-dialout-trunk:12] ExecIf("SIP/1001-085d74b0", "0|AGI|fixlocalprefix") in new stack
    -- Executing [s@macro-dialout-trunk:13] Set("SIP/1001-085d74b0", "OUTNUM=225103843") in new stack
    -- Executing [s@macro-dialout-trunk:14] Set("SIP/1001-085d74b0", "custom=DAHDI/g0") in new stack
    -- Executing [s@macro-dialout-trunk:15] ExecIf("SIP/1001-085d74b0", "0|Set|DIAL_TRUNK_OPTIONS=M(setmusic^)") in new stack
    -- Executing [s@macro-dialout-trunk:16] Macro("SIP/1001-085d74b0", "dialout-trunk-predial-hook|") in new stack
    -- Executing [s@macro-dialout-trunk-predial-hook:1] MacroExit("SIP/1001-085d74b0", "") in new stack
    -- Executing [s@macro-dialout-trunk:17] GotoIf("SIP/1001-085d74b0", "0?bypass|1") in new stack
    -- Executing [s@macro-dialout-trunk:18] GotoIf("SIP/1001-085d74b0", "0?customtrunk") in new stack
    -- Executing [s@macro-dialout-trunk:19] Dial("SIP/1001-085d74b0", "DAHDI/g0/225103843|300|") in new stack
    == Everyone is busy/congested at this time (1:0/0/1)
    -- Executing [s@macro-dialout-trunk:20] Goto("SIP/1001-085d74b0", "s-CHANUNAVAIL|1") in new stack
    -- Goto (macro-dialout-trunk,s-CHANUNAVAIL,1)
    -- Executing [s-CHANUNAVAIL@macro-dialout-trunk:1] GotoIf("SIP/1001-085d74b0", "1?noreport") in new stack
    -- Goto (macro-dialout-trunk,s-CHANUNAVAIL,3)
    -- Executing [s-CHANUNAVAIL@macro-dialout-trunk:3] NoOp("SIP/1001-085d74b0", "TRUNK Dial failed due to CHANUNAVAIL (hangupcause: 66) - failing through to other trunks") in new stack

    As far as I know zaptel is now dahdi, the configuration is the one that came by default,
    Am I missing something?

    In the Flash pannel appear 8 DANDI trunks, If anyone need more information please tell me
    I'm quite desperate.


    Thanks in advance.
     

Share This Page