Digium B410P - Dahdi

Discussion in 'Gateways' started by newnet82, Sep 8, 2009.

  1. newnet82

    Joined:
    Apr 25, 2009
    Messages:
    57
    Likes Received:
    0
    Hi,

    I try to configure a Digium B410P card with 2 T0 with a clean elastix 1.5.2 installation.

    I done a dahdi_genconf

    I done a dahdi_scan and found :

    [1]
    active=yes
    alarms=OK
    description=B4XXP (PCI) Card 0 Span 1
    name=B4/0/1
    manufacturer=Digium
    devicetype=Wildcard B410P
    location=PCI Bus 06 Slot 02
    basechan=1
    totchans=3
    irq=10
    type=digital-TE
    syncsrc=0
    lbo=0 db (CSU)/0-133 feet (DSX-1)
    coding_opts=B8ZS,AMI,HDB3
    framing_opts=ESF,D4,CCS,CRC4
    coding=AMI
    framing=CCS
    [2]
    active=yes
    alarms=OK
    description=B4XXP (PCI) Card 0 Span 2
    name=B4/0/2
    manufacturer=Digium
    devicetype=Wildcard B410P
    location=PCI Bus 06 Slot 02
    basechan=4
    totchans=3
    irq=10
    type=digital-TE
    syncsrc=0
    lbo=0 db (CSU)/0-133 feet (DSX-1)
    coding_opts=B8ZS,AMI,HDB3
    framing_opts=ESF,D4,CCS,CRC4
    coding=AMI
    framing=CCS
    [3]
    active=yes
    alarms=RED
    description=B4XXP (PCI) Card 0 Span 3
    name=B4/0/3
    manufacturer=Digium
    devicetype=Wildcard B410P
    location=PCI Bus 06 Slot 02
    basechan=7
    totchans=3
    irq=10
    type=digital-TE
    syncsrc=0
    lbo=0 db (CSU)/0-133 feet (DSX-1)
    coding_opts=B8ZS,AMI,HDB3
    framing_opts=ESF,D4,CCS,CRC4
    coding=AMI
    framing=CCS
    [4]
    active=yes
    alarms=RED
    description=B4XXP (PCI) Card 0 Span 4
    name=B4/0/4
    manufacturer=Digium
    devicetype=Wildcard B410P
    location=PCI Bus 06 Slot 02
    basechan=10
    totchans=3
    irq=10
    type=digital-TE
    syncsrc=0
    lbo=0 db (CSU)/0-133 feet (DSX-1)
    coding_opts=B8ZS,AMI,HDB3
    framing_opts=ESF,D4,CCS,CRC4
    coding=AMI
    framing=CCS

    I done a dahdi_cfg -vvv and found :

    DAHDI Tools Version - 2.1.0.2

    DAHDI Version: 2.1.0.4
    Echo Canceller(s): MG2, OSLEC
    Configuration
    ======================

    SPAN 1: CCS/ AMI Build-out: 0 db (CSU)/0-133 feet (DSX-1)
    SPAN 2: CCS/ AMI Build-out: 0 db (CSU)/0-133 feet (DSX-1)
    SPAN 3: CCS/ AMI Build-out: 0 db (CSU)/0-133 feet (DSX-1)
    SPAN 4: CCS/ AMI Build-out: 0 db (CSU)/0-133 feet (DSX-1)

    Channel map:
    Channel 01: Clear channel (Default) (Echo Canceler: oslec) (Slaves: 01)
    Channel 02: Clear channel (Default) (Echo Canceler: oslec) (Slaves: 02)
    Channel 03: D-channel (Default) (Slaves: 03)
    Channel 04: Clear channel (Default) (Echo Canceler: oslec) (Slaves: 04)
    Channel 05: Clear channel (Default) (Echo Canceler: oslec) (Slaves: 05)
    Channel 06: D-channel (Default) (Slaves: 06)
    Channel 07: Clear channel (Default) (Echo Canceler: oslec) (Slaves: 07)
    Channel 08: Clear channel (Default) (Echo Canceler: oslec) (Slaves: 08)
    Channel 09: D-channel (Default) (Slaves: 09)
    Channel 10: Clear channel (Default) (Echo Canceler: oslec) (Slaves: 10)
    Channel 11: Clear channel (Default) (Echo Canceler: oslec) (Slaves: 11)
    Channel 12: D-channel (Default) (Slaves: 12)

    12 channels to configure.

    Setting echocan for channel 1 to oslec
    Setting echocan for channel 2 to oslec
    Setting echocan for channel 4 to oslec
    Setting echocan for channel 5 to oslec
    Setting echocan for channel 7 to oslec
    Setting echocan for channel 8 to oslec
    Setting echocan for channel 10 to oslec
    Setting echocan for channel 11 to oslec

    Can somebody help me to configure the trunk associate to those 2 T0 ? (and chan_dahdi*, dahdi-channels.conf, ...)

    BR
     

Share This Page