Dialing out problem losing digits (SOLVED)

Discussion in 'General' started by Thelastphoneguy, Jun 8, 2010.

  1. Thelastphoneguy

    Joined:
    Sep 17, 2009
    Messages:
    11
    Likes Received:
    0
    New to Elastix and Asterisk. Please forgive me if this has been answered before or is a dumb question. I have searched far and wide for an answer. I have a new test system up and running. the problem I am having is 1 out 5 outbound calls are going through the problem seems to be that the system is sending the dtmf tones too soon after getting dialtone. I am using a sangoma a200 with 8 fxo ports and elastrix 1.16-12. I found a clue somewhere that said to insert a w in the dial plan. I can not find the screen in the elastix GUI to insert this "w".

    Thanks
     
  2. jgutierrez

    Joined:
    Feb 28, 2008
    Messages:
    5,737
    Likes Received:
    0
    Re: Dialing out problem

    You must go to:
    PBX -> PBX Configuration -> Trunks -> Choose your trunk (for example g0)
    There is a field called <Outbound Dial Prefix>, there you should place the w, as many as you need
     
  3. Thelastphoneguy

    Joined:
    Sep 17, 2009
    Messages:
    11
    Likes Received:
    0
    Re:Dialing out problem

    You Da Man.

    Thank you
     

Share This Page