Dahdi Trunk with Openvox B100p board

Discussion in 'General' started by msc-csi, Mar 16, 2011.

  1. msc-csi

    Joined:
    Mar 16, 2011
    Messages:
    5
    Likes Received:
    0
    Hi,

    I am fairly new to elastix I have in my company a server with one FXO and two FXS and a few VOIP extensions and all is fine.

    My problem resides in the following.

    I now have a new server with an fxo on an a400 board from openvox working perfect and a B100p that I can't put to work. My question is how do I set the trunk to be able to use it?

    Thannk you for any help .

    Manuel
     
  2. fmvillares

    Joined:
    Sep 8, 2007
    Messages:
    1,785
    Likes Received:
    0
    search for lisa.gao in the forums as they will help you with those cards...they re simply crap
     
  3. msc-csi

    Joined:
    Mar 16, 2011
    Messages:
    5
    Likes Received:
    0
    Thank you for your reply.

    But my problem resides not on the board itself as the system detects it fine. I just don't know how to setup a trunk to use it.

    Thank you for your help.

    Manuel
     
  4. msc-csi

    Joined:
    Mar 16, 2011
    Messages:
    5
    Likes Received:
    0
    Thank you for your reply.

    But my problem resides not on the board itself as the system detects it fine. I just don't know how to setup a trunk to use it.

    Thank you for your help.

    Manuel
     

Share This Page