Dahdi problem

Discussion in 'General' started by baldallo, Sep 30, 2009.

  1. baldallo

    Joined:
    Sep 26, 2008
    Messages:
    5
    Likes Received:
    0
    I am using Elastix 1.5.2 in Xorcom unit with digital ports (R2, Variant ve).
    All channels and E1 link were reconized, in fact I can do test with r2test.conf (I am using openr2 lib).

    When I tried to start Asterisk , I can't run Dahdi show channels command, and on the web interface all channels have the message "not in use".

    Extra information:
    - Asterisk Version: asterisk-1.4.24.1-2
    - lsdahdi output:
    ### Span 1: XBUS-00/XPD-00 "Xorcom XPD #00/00: E1" (MASTER) HDB3/ ClockSource
    1 E1 CAS (SWEC: MG2)
    .......to channel 15
    16 E1 HDLCFCS
    17 E1 CAS (SWEC: MG2)
    .....to channel 31
    31 E1 CAS (SWEC: MG2)
    ### Span 2: XBUS-00/XPD-01 "Xorcom XPD #00/01: E1" HDB3/
    32 E1 CAS (SWEC: MG2)
    ......to channel 47
    47 E1 HDLCFCS
    48 E1 CAS (SWEC: MG2)
    ......to channel 62
    62 E1 CAS (SWEC: MG2)

    When I tried loading chan_dahdi module on Asterisk CLI, next is the output:
    CLI output:
    module unload chan_dahdi.so
    == Unregistered application 'DAHDISendKeypadFacility'
    == Unregistered application 'ZapSendKeypadFacility'
    module load chan_dahdi.so
    == Registered application 'DAHDISendKeypadFacility'
    == Registered application 'ZapSendKeypadFacility'
    == Parsing '/etc/asterisk/chan_dahdi.conf': Found
    == Parsing '/etc/asterisk/dahdi-channels.conf': Found
    == Parsing '/etc/asterisk/chan_dahdi_additional.conf': Found

    Parameters in chan_dahdi.conf
    group=1
    context=from-internal
    signalling =mfcr2
    mfcr2_variant=ve
    mfcr2_get_ani_first=no
    mfcr2_max_ani=10
    mfcr2_max_dnis=4
    mfcr2_category=national_subscriber
    mfcr2_logdir=log
    mfcr2_call_files=yes
    mfcr2_logging=all
    channel => 1-15
    channel => 32-46

    group=2
    context=from-zaptel
    signalling =mfcr2
    mfcr2_variant=ve
    mfcr2_get_ani_first=no
    mfcr2_max_ani=10
    mfcr2_max_dnis=4
    mfcr2_category=national_subscriber
    mfcr2_logdir=log
    mfcr2_call_files=yes
    mfcr2_logging=all
    channel => 17-31
    channel => 48-62
     
  2. RabihBou

    Joined:
    Feb 18, 2010
    Messages:
    1
    Likes Received:
    0
    Amigo, lograste hacer funcionar el E1 en Venezuela usando OpenR2? podrías ser tan amable de enviarme los archivos de configuración a rabihbouorm@gmail.com por favor, que tengo pensado empezar a hacerlo y me encantaría tener este punto de partida. te lo agradecería enormemente
     

Share This Page