dahdi HELP

mattrh

Joined
Jul 15, 2008
Messages
175
Likes
0
Points
0
#1
my server was upgraded to the most current elastix. so now the server boots up but i can not make a call out.

wancfg_dahdi -errors out and can't find my A102 Sangoma!

HELP!!
 

mattrh

Joined
Jul 15, 2008
Messages
175
Likes
0
Points
0
#2
# dahdi_cfg
DAHDI_SPANCONFIG failed on span 1: Invalid argument (22)
 

mattrh

Joined
Jul 15, 2008
Messages
175
Likes
0
Points
0
#3
# dahdi_cfg -vvvvvvvvvvvvv
DAHDI Tools Version - 2.1.0.2

DAHDI Version: 2.1.0.4
Echo Canceller(s):
Configuration
======================

SPAN 1: ESF/B8ZS Build-out: 0 db (CSU)/0-133 feet (DSX-1)
SPAN 2: ESF/B8ZS Build-out: 0 db (CSU)/0-133 feet (DSX-1)

Channel map:

Channel 01: Clear channel (Default) (Slaves: 01)
Channel 02: Clear channel (Default) (Slaves: 02)
Channel 03: Clear channel (Default) (Slaves: 03)
Channel 04: Clear channel (Default) (Slaves: 04)
Channel 05: Clear channel (Default) (Slaves: 05)
Channel 06: Clear channel (Default) (Slaves: 06)
Channel 07: Clear channel (Default) (Slaves: 07)
Channel 08: Clear channel (Default) (Slaves: 08)
Channel 09: Clear channel (Default) (Slaves: 09)
Channel 10: Clear channel (Default) (Slaves: 10)
Channel 11: Clear channel (Default) (Slaves: 11)
Channel 12: Clear channel (Default) (Slaves: 12)
Channel 13: Clear channel (Default) (Slaves: 13)
Channel 14: Clear channel (Default) (Slaves: 14)
Channel 15: Clear channel (Default) (Slaves: 15)
Channel 16: Clear channel (Default) (Slaves: 16)
Channel 17: Clear channel (Default) (Slaves: 17)
Channel 18: Clear channel (Default) (Slaves: 18)
Channel 19: Clear channel (Default) (Slaves: 19)
Channel 20: Clear channel (Default) (Slaves: 20)
Channel 21: Clear channel (Default) (Slaves: 21)
Channel 22: Clear channel (Default) (Slaves: 22)
Channel 23: Clear channel (Default) (Slaves: 23)
Channel 24: Hardware assisted D-channel (Default) (Slaves: 24)
Channel 25: Clear channel (Default) (Slaves: 25)
Channel 26: Clear channel (Default) (Slaves: 26)
Channel 27: Clear channel (Default) (Slaves: 27)
Channel 28: Clear channel (Default) (Slaves: 28)
Channel 29: Clear channel (Default) (Slaves: 29)
Channel 30: Clear channel (Default) (Slaves: 30)
Channel 31: Clear channel (Default) (Slaves: 31)
Channel 32: Clear channel (Default) (Slaves: 32)
Channel 33: Clear channel (Default) (Slaves: 33)
Channel 34: Clear channel (Default) (Slaves: 34)
Channel 35: Clear channel (Default) (Slaves: 35)
Channel 36: Clear channel (Default) (Slaves: 36)
Channel 37: Clear channel (Default) (Slaves: 37)
Channel 38: Clear channel (Default) (Slaves: 38)
Channel 39: Clear channel (Default) (Slaves: 39)
Channel 40: Clear channel (Default) (Slaves: 40)
Channel 41: Clear channel (Default) (Slaves: 41)
Channel 42: Clear channel (Default) (Slaves: 42)
Channel 43: Clear channel (Default) (Slaves: 43)
Channel 44: Clear channel (Default) (Slaves: 44)
Channel 45: Clear channel (Default) (Slaves: 45)
Channel 46: Clear channel (Default) (Slaves: 46)
Channel 47: Clear channel (Default) (Slaves: 47)
Channel 48: Hardware assisted D-channel (Default) (Slaves: 48)

48 channels to configure.

DAHDI_SPANCONFIG failed on span 1: Invalid argument (22)
 

mattrh

Joined
Jul 15, 2008
Messages
175
Likes
0
Points
0
#4
/etc/init.d/dahdi restart
Unloading DAHDI hardware modules: ERROR: Module dahdi is in use
error
Loading DAHDI hardware modules:
wanpipe: FATAL: Error inserting wanpipe (/lib/modules/2.6.18-92.1.22.el5/kernel/drivers/net/wan/wanpipe.ko): Unknown symbol in module, or unknown parameter (see dmesg)
[FAILED]

No hardware timing source found in /proc/dahdi, loading dahdi_dummy
Running dahdi_cfg: [ OK ]
 

mattrh

Joined
Jul 15, 2008
Messages
175
Likes
0
Points
0
#5
here is where i am at HELP

Code:
# service asterisk start
SETTING FILE PERMISSIONS Asterisk
Permissions Asterisk OK
Starting asterisk:                                         [  OK  ]
[root@fapphonesvr dahdi-linux-2.2.0.1]# service dahdi start
Loading DAHDI hardware modules:
FATAL: Error inserting dahdi (/lib/modules/2.6.18-92.1.22.el5/dahdi/dahdi.ko): Device or resource busy
  wanpipe:                                                 [  OK  ]

Error: missing /dev/dahdi!
[root@fapphonesvr dahdi-linux-2.2.0.1]# make modules
make -C drivers/dahdi/firmware firmware-loaders
make[1]: Entering directory `/usr/src/dahdi-linux-2.2.0.1/drivers/dahdi/firmware'
make[1]: Leaving directory `/usr/src/dahdi-linux-2.2.0.1/drivers/dahdi/firmware'
make -C /lib/modules/2.6.18-92.1.22.el5/build SUBDIRS=/usr/src/dahdi-linux-2.2.0.1/drivers/dahdi DAHDI_INCLUDE=/usr/src/dahdi-linux-2.2.0.1/include DAHDI_MODULES_EXTRA=" " HOTPLUG_FIRMWARE=yes modules DAHDI_BUILD_ALL=m
make[1]: Entering directory `/usr/src/kernels/2.6.18-92.1.22.el5-i686'

  Building modules, stage 2.
  MODPOST
WARNING: could not find /usr/src/dahdi-linux-2.2.0.1/drivers/dahdi/vpmadt032_loader/.vpmadt032_x86_32.o.cmd for /usr/src/dahdi-linux-2.2.0.1/drivers/dahdi/vpmadt032_loader/vpmadt032_x86_32.o
make[1]: Leaving directory `/usr/src/kernels/2.6.18-92.1.22.el5-i686'
 

ronaldlw

Joined
May 7, 2009
Messages
81
Likes
0
Points
0
#6
couple of things I know:
1) you have to stop asterisk before restarting dahdi service, that's why you got the dahdi module in use error.

2) I think you also should start dahdi before asterisk.

3) you should check your /etc/dahdi/modules file to make sure that the module for your card is listed (sorry I don't know what it should be.) the update process has a tendency to just replace this file which can mess you up.

4) good luck!
 

mattrh

Joined
Jul 15, 2008
Messages
175
Likes
0
Points
0
#7
i already tried all that, 10hr's later i just moved back to an old server image and we are back up :(
 

mattrh

Joined
Jul 15, 2008
Messages
175
Likes
0
Points
0
#8
the biggest issue is moving from zap to dahdi; also using wanpipe drivers dont help haha
 

Members online

No members online now.

Latest posts

Forum statistics

Threads
30,902
Messages
130,886
Members
17,563
Latest member
dineshr
Top