dahdi Help Please

Discussion in 'General' started by VoIPSensei, Sep 23, 2009.

  1. VoIPSensei

    Joined:
    Sep 22, 2009
    Messages:
    1
    Likes Received:
    0
    I have just installed the latest version of elastix with a Rhino R1T1 with a PRI. The PRI seems to be working but I am having a few issues.

    1. dahdi-channels.conf as well as chan_dahdi_additional.conf are both blank. Is that correct ?

    2. The FOP does not have anything listed under Trunks.

    3. On the HARDWARE DETECTION page all of my channels are lit green and everything looks good except that all of my channels say "In Use" even though they arent. Again I can make and recieve calls but it seems like something is missing.

    my chan_dahdi.conf looks like this:

    [trunkgroups]

    [channels]
    context=from-pstn
    signalling=fxs_ks
    rxwink=300 ; Atlas seems to use long (250ms) winks
    usecallerid=yes
    hidecallerid=no
    callwaiting=yes
    usecallingpres=yes
    callwaitingcallerid=yes
    threewaycalling=yes
    transfer=yes
    canpark=yes
    cancallforward=yes
    callreturn=yes
    echocancel=yes
    echocancelwhenbridged=no
    faxdetect=incoming
    echotraining=800
    rxgain=0.0
    txgain=0.0
    callgroup=1
    pickupgroup=1

    ;Uncomment these lines if you have problems with the disconection of your analog lines
    ;busydetect=yes
    ;busycount=3


    immediate=no

    context=from-pstn
    signalling=pri_cpe
    group=0
    channel=>1-21

    #include dahdi-channels.conf
    #include chan_dahdi_additional.conf



    Any help would be greatly appreciated. Thanks.
     

Share This Page