Crashing System on Installation

Discussion in 'General' started by kmullen, Aug 19, 2010.

  1. kmullen

    Joined:
    Dec 11, 2009
    Messages:
    70
    Likes Received:
    0
    The strangest thing is happening when I attempt to install Elastix 2.0

    1) I attempted to install the 64 bit version on a brand new Intel server. The installation got to the point of formatting the drive then stopped. When I rebooted the machine, it would not come back up. Not even post codes or the bios flash screen. So I thought I had bad hardware and arranged for a new motherboard.
    2) While waiting for the new motherboard, I attempted to install Elastix 2.0 32bit on a P4 with 512 meg ram and 160 gig hard drive. Again, it got to the point of formatting and copying to hard drive then crashed. Again, when I rebooted the system will not come back up. No post codes and now bios screen.

    2 different systems, 2 different versions of Elastix 32 bit and 64 bit.

    Help!
     
  2. kmullen

    Joined:
    Dec 11, 2009
    Messages:
    70
    Likes Received:
    0
    Update: Apparently I had a bad iso image on the 32 bit version. I reburned a new disk and tested it as ok.

    I completed the installation of Elastix on the P4 server, however when the system rebooted it would not come back up. Same issue.

    No post code.
    No bios flash screen and no video.
     
  3. leoman70

    Joined:
    Mar 22, 2009
    Messages:
    6
    Likes Received:
    0
    Did you try installing it in a different hardisk?
     
  4. leoman70

    Joined:
    Mar 22, 2009
    Messages:
    6
    Likes Received:
    0
    try to install using --> linux pci=nommconf
     

Share This Page